Install Manual

LANDSCAPE
BRACKET INSTALLATION
19
③ Adjust the RT butyl tape to
match the height of the
upper shingle. When there is
a gap, a slit, or a height
difference at the mounting
location of the bracket, use
additional RT butyl tape
(Installation B).
● When there is a slit at the
installation spot, fill in with
the additional RT butyl tape.
The slit must be filled with
RT butyl tape.
● When there is a slit
above the bracket, fill it in
with RT butyl tape to match
its shape. Apply roof
sealant around the RT butyl
tape.
Notice that the roof sealant
is only used to add a
protective layer to the RT
butyl tape.
● Best to position the bracket
2” away from the slit.
● If the mounting screw is
within less than 2” from the
slit, fill the slit with RT
butyl tape.
Rafter Install