Install Manual

Splice Installation
47
(2)-1 Floating Splice Installation on the First Row (eaves side)
※ Install the End splice for the first and the ridge rows installation.
(First Row ; A base is needed on the eaves side)
① End Floating Splice shall be installed
with Base Bracket for the first Row.
(Also shown on Pgs. 49 & 53)
※ In case of the floating splice with the skirt between two mounts.
(A base is not needed on the eaves side)
① A floating splice may be used once
a skirt is installed between two
adjacent PV modules. Verify PV
module installation manual
specifications for the “Floating
splice”. The maximum span
between bases must be verified
with the PE stamped letters and
the max. grd. snow allowed for the
skirt is 40 PSF.