Install Manual

LANDSCAPE
PANEL INSTALLATION
32
④ If necessary, level the height of
the brackets using a hex bit
socket (8 mm).
Adjusting height shall be done
within the range from bottom
where the Pillar hits the clamp,
to the top where the pillar is
flush to the top of U-D bracket.
Adjustable height is up to 1”
(30mm frame), 1 3/8” (40mm
frame).
⑤ Slide in the PV panel from the
ridge side. Make sure PV panel
frame slides on the inside of the
middle clamp.
Max height line