Install Manual

LANDSCAPE
PANEL INSTALLATION
31
(3) Middle Clamp Installation
① Slide the RT-APEX Middle
clamp until it is flush to the
frame of the panel already
installed.
② Tighten the head cap screw
M8x9, on the bottom side of the
pillar, from side to 106 in-lbs
(12 N･m) torque.
③ Tighten the Middle clamp
head cap screw M10 to 142 in-
lbs (16 N ･ m) or 159 in-lbs
(18N･m) torque. (see appendix
for the proper torque value).