Install Manual

LANDSCAPE

BRACKET INSTALLATION

⑥ Installing the bracket.

Place the brackets at the specified position with RT butyl tape and

make sure the RT butyl attaches well to the roofing surface.

Set the bracket with 2 ea. screws (for RAFTER), or 5 ea. (for Roof

DECK), 5.0×60 mm stainless wood screw using 8 mm socket.

After completing process, make sure the brackets are securely fixed.

・Note: "R" logo on top right of the base should

always be on the ridge side when installing.

Attention

Rafter Install

The screw location for

Rafter Installation