Install Manual

ADDENDUM
Installation Instruction for Composite Slate
27
Installation on a Composite Slate
1. Requirement
･ Composite Slate, compatible
with RT Butyl
2. Marking on the Roof
(1) Layout
① The MINI Ⅱ base must be
mounted on the flat surface.
② Mark at ± 15 mm, ± 25
mm from the intersection of
the M Line and Y Line.
③ Then mark at ± 32.5 mm
from the M Line
④ Mark at ＋35 mm from the
Y Line on the M Line.
⑤ If the Mini is located at the
gap of the roof surface or
within 50mm, the gap has to
be filled with sealant or
butyl tape as seen in the
exhibit to the right.