Install Manual

Bracket Installation
17
⑤ Installing the bracket.
Place the brackets at the
specified position and
make sure the RT butyl
makes good contact with
the roofing surface.
Slide the 5/16” Flanged bolt
into place before fastening
the bracket on the roof.
Set the bracket with 2 ea.
Screws, M5.0 × 60 mm
stainless wood screw using
8mm hex socket.
After completing process,
make sure the brackets are
securely fixed.
The 5/16” Flanged bolt must be
set on the channel before both
wood screws are fixed to the
rafter.
Attention
!
[Fastening it to the Rafter]