Install Manual

Bracket Installation
15
[Case 2]
● Building layers of RT butyl for
the bracket to be mounted over
the teeth region of composite
shingle roofs.
We recommend 4 layers
maximum.
Layer 1 is already applied to
the bottom of the bracket.
The following layers must be
cut to shape to cover the
surface of the bracket at each
location, assuring a leveled
surface.
■Butyl spacer
■Butyl spacer
■Butyl spacer
Note:Do not splice the butyl tape.
■Butyl spacer
■Butyl spacer
■Butyl spacer
1 layer of butyl tape
2 layers of butyl tape