Installation & Assembly

170920ronbow.eu | ronbow.comINSTALLATION SHEET
4
SINK Drop-In / Self-Rimming
Model :
E072443
E022101
E022102
E022105
E082520
E012002
E092830
E092842
Recommended Products
Solid Surface Sinks
Propietary Bathroom Cleaning Products
DISCLAIMERS:
Eectiveness of cleaning your Ronbow products is dependent on various factors that include: water temperature, concentration and/or
amounts of cleansers. Because of these many dierent conditions, Ronbow cannot guarantee that the above
Product Care & Maintenance methods will
eectively clean your product.
After applying recommended cleaning products, wipe surfaces clean and rinse completely with water
immediately
Use mild cleaning solution only, Strong, abrasive cleaners are not recommended, and can damage surface.
Do not allow cleaner to soak.
Use a soft, dampened sponge or cloth. Never use an abrasive materials such as a brushed or scouring pad
to clean surface.
Always test your cleaning solution on a inconspicuous area before apply to the entire surface.
Hot pans, electric frying pans, waffle irons, crock-pots, and other heat-generating appliances can damage
the surface. To prevent heat damager, always use a trivet with rubber feet between the appliance and the
countertop.
Avoid exposing solid surface to strong chemicals, such as paint removers, oven cleaner, ect. If contact
occurs, quickly flush the surface with water.
Remove nail polish with a non-acetone-based nail polish remover and flush with water.
Do not cut directly on your solid surface countertop. Cutting directly on it will damage the surface.
Run cold water when pouring boiling water into sinks
Soapy water and a sponge will remove most stains. Do not use 409 or Fantastik.
For more stubborn stains use a blue scotch-brite pad and Soft-Scrub.