Installation & Assembly

170620ronbow.comINSTALLATION SHEET
1
DROP-IN CERAMIC SINK
Model :
Item Number starting with 2003XX, 2004XX
Tools Required
MATERIALS INCLUDED
1 Vitreous China Drop In Sink
Position countertop opening to ensure clearance
between the lavatory, faucet, and backsplash.
Cut counter top opening and cut-out base on the
cut-out template provided. Set sink and seal with
silicone or caulking
Step 1:
See Figure 1.
DO NOT USE any adhesives with silicone. Silicone will bond to
the decorative finish and cause permanent damage. Check the
Ronbow website for the individual sink cutout template.
NOTE:
Figure 1.
Place a generous portion of plumbers’ putty
under drain cap and insert whole drain body
inside the bowl and through the countertop.
NOTE: There may be a small beveled rubber
washer packaged with your drain, please discard
this and use plumbers’ putty instead)
Step 2:
See Figure 2.
Figure 2.
Figure 3.
Drain Cap
Overflow hole
Metal Nut
Thick rubber
washer
Tailpiece
From under the drain, insert the thickrubber
washer and screw on and tighten the metal nut.
Remove excess plumbers’ putty
Step 3:
See Figure 3.
Attach p-trap to tailpiece.
Step 4:
countertop
Drain Nut
Tailpiece
Thick rubber
washer
P-trap
Drain