Installation & Assembly
STACK LED Mirror Cabinet
Model :
E015612
E015615
Designed By: PHOENIX DESIGN | GERMANY
160823ronbow.eu | ronbow.comINSTALLATION SHEET
1
Tools Required
PRE-INSTALLATION
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENSED ELECTRICIAN.
WARNING: To reduce the risk of electrical shock, shut o power before wiring the cabinet.
CAUTION: Requires 120V 20AMP circuit.
CAUTION: The LED mirror must be wired to a GFI (ground fault interrupter) circuit breaker when used in
bathrooms and all other locations required by the national electric code.
120VAC
20A GFI
CIRCUIT BREAKER
FIELD CONNECTION
LED MIRROR CABINET
DEFOGGER
White = Negative
Green= Ground
Black= Positive
White = Negative
LED
Black= Positive
Green= Ground
E015612
4 long screws
1 set of wall cleats
E015615
6 long screws
1 set of wall cleats
1 2x4 beam
1 electrical box
3 wire nuts
Materials Included
Materials Required