Instruction Manual
23
ITEM FUNCTION
Loop test
This item invokes a method that performs a test on the primary 4-20ma current loop
Damping
Shows, and allows the user to set, the damping constant for the primary 4-20ma
current loop
D/A trim
This item invokes method that performs the D/A trimming of the primary 4-20ma
current loop
Aux Loop Cfg Menu
This menu is used to access the secondary 4-20ma loop calibration procedures. It contains the following items:
ITEM FUNCTION
SV is
Shows, and allows the user to set, the variable assigned to the secondary 4-20ma
current loop
Loop test
This item invokes a method that performs a test on the secondary 4-20ma current loop
Damping
Shows, and allows the user to set, the damping constant for the secondary 4-20ma
current loop
D/A trim
This item invokes a method that performs the D/A trimming of the secondary 4-20ma
current loop
SV is is one of the following:
SV is MEANING
Level Level
Head Temp Head temperature (if available)
Not Assigned Blank line