User Manual

Recommended Use

Cut rope (nylon, PP), Webbing, braiding tube.

TROUBLE SHOOT

OPERATING

ISSUE

CAUSES

RECOMMENDATIONS

Cutter will not turn

on.

No power to cutter.

Blade not installed

properly.

Verify cutter is plugged into live

110V outlet.

Make sure blade is installed

correctly.

Residue build-up

on cutter.

Residue forms after

repeated uses.

Follow “Blade Cleaning

Instructions.”

Cutter stops

working during use.

Cutter overheated.

Let cutter cool and restart.

Make sure cutter is not forced on.

Excessive smoking

during cutting.

Cutting fabric/rope too

slowly.

Blade too hot.

Let cutter cool. Restart unit.

ACCESSORIES/REPLACEMENT PARTS

Amazon Store: https://www.amazon.com/romech

RoMech Store: https://www.ticonnshop.com/romech

Customer service:

Email: RoMechDirect@gmail.com

FABRIC/ROPE CUTTER

□30W □60W □160W □250W □

300W

User Manual

PAGE 1
Recommended Use Cut rope (nylon, PP), Webbing, braiding tube. TROUBLE SHOOT OPERATING ISSUE Cutter will not turn on. CAUSES RECOMMENDATIONS No power to cutter. Blade not installed properly. Residue build-up on cutter. Cutter stops working during use. Excessive smoking during cutting. Residue forms after repeated uses. Cutter overheated. Verify cutter is plugged into live 110V outlet. Make sure blade is installed correctly. Follow “Blade Cleaning Instructions.” Let cutter cool and restart.
PAGE 2
SAFETY & WARNING To use the unit safely, it must be set up and operated in accordance with the instructions in this user manual. Please read the safety precautions, to prevent harm to you and others, and to avoid damage to the tools. • Before use, make sure the set is complete and the machine is in working order • Don’t use the cutter if damaged.