Specifications

UHP-1000 SATELLITE ROUTER
INSTALLATION AND OPERATION MANUAL, V. 2.5
(SW VERSION 2.5.X)
© ROMANTIS 2012 9 www.romantis.com
1. GENERAL DESCRIPTION
1.1 System overview
1.1.1 Purpose
UHP satellite routers are essentially a universal solution for geographically distributed VSAT-class satellite
communication networks. UHP routers can be used to organize simple point-to-point channels, “star”- and
“mesh”-topology networks with several hierarchy levels and bandwidth-on-demand capabilities.
UHP VSAT platform is based on many innovation technologies. It was developed using long-term experience in
satellite service provisioning. Nowadays electronics achievements made it possible to make VSAT platform
compact and assure its efficiency and reach functionality.
1.1.2 Technical specifications
Table 1 UHP-1000 Satellite Router Specifications
PARAMETER
SPECIFICATION
MODULATOR
Operation mode
Continuous (SCPC, MCPC) DVB-S1, DVB-S2 CCM, DVB-S2 Short and DVB-S2
Long-frame
Burst (TDMA)
Modulation
SCPC: QPSK, 8PSK (DVB-S2), 16APSK (with DVB-S2)
TDMA: QPSK, 8PSK (future SW deployment)
Transmission data rate
DVB-S1: 250-34000 kSps (240-54000 kbps)
DVB-S2: 550-32000 kSps (530-86000 kbps)
TDMA: 100-4000 kSps (130-6000 kbps)
Step – 1 kSps
Forward Error Coding
DVB-S1 (Viterbi+RS) 1/2 , 2/3, 3/4, 5/6, 7/8;
DVB-S2 (LDPC&BCH ) 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
TDMA (LDPC) 2/3, 5/6
Output spectrum
In compliance with IESS-308
Auto adjustment
Power Level
HIGH-SPEED DEMODULATOR
Operation mode
Continuous (SCPC, MCPC) DVB-S and DVB-S2
Receive datarate
Up to 86 Mbit/s
Modulation
QPSK (DVB-S/S2), 8PSK (DVB-S2), 16APSK (DVB-S2)
BURST DEMODULATOR
Operation mode
Burst (TDMA)
Receive datarate
Up to 6 Mbps (LDPC)
Modulation
QPSK
Forward Error Coding
FEC 2/3, 5/6 LDPC
INTERFACES
LAN (User Interface)
Ethernet 10/100Base-T, RJ-45
Control console
USB
IF reception (SCPC Rx and TDMA Rx)
950-2050 MHz
LNB converter power supply 13.5 VDC / 18 V (0.75A)
Reference frequency 10 MHz / +5 dBm (TDMA Rx)
IF transmission (Tx OUT)
950 -1550 MHz
1
Output power -30… -5 dBm
2
with 0.1 dBm steps
Reference frequency 10 MHz / +5 dBm
1
Up to 1700 MHz with no guaranty
2
Up to -36… -1 dBm with no guaranty