Specifications

UHP-1000 SATELLITE ROUTER

INSTALLATION AND OPERATION MANUAL, V. 2.5

(SW VERSION 2.5.X)

INTRODUCTION

This document presents a general description of the UHP-1000 series satellite routers and is intended for

familiarization with the system capabilities and specifications. This manual describes all the key modes of the

router operations. Some of such modes of operations are described in the separate manuals – attachments to this

document.

Required level of qualification

This manual is intended for engineering personnel operating the UHP -based satellite networks. The engineers

have to have a basic radio engineering education, experience in administration of data networks.

Document version and applicability

UHP-1000 Satellite router is a basic element of network architecture and can be used at any level of network

hierarchy. The functionality of the router and its modes of operations are determined by the activated software

features.

This document version is 2.5 and it’s applicable for all UHP-1000 series satellite routers with SW release 2.5.X and

serial numbers above 3501. When ordering this document please specify its article: RD.IOM1.EN2.5.

Title

The content of this document is the intellectual property of Romantis GmbH (referred to below as Romantis).

Copying or quoting this description as a whole or of any part of it without Romantis written permission is

prohibited.

Compliance to Standards

Romantis declares that all manufactured UHP-1000 series satellite routers comply with international industrial

standards and requirements, namely to:

 ETSI EN 301 428 – Earth stations and satellite communication systems.

 ETSI EN 301 489-1 & -12 - Electromagnetic compatibility and RF spectrum.

 EN 60 950-1 – Telecommunication devices safety.

 Requirements to satellite communication earth stations operating in the Eutelsat system (type approval).

 Requirements to satellite communication land stations operating in the Intelsat system (IESS-308).