Specifications

UHP-1000 SATELLITE ROUTER

INSTALLATION AND OPERATION MANUAL, V. 2.5

(SW VERSION 2.5.X)

UHP # ping 10.0.0.1

SRC: 10.0.0.13 -> DST: 10.0.0.1 VLAN: 0

5 packets of 40 (12+8+20) bytes every 1000 ms (320 bps)

----------------------------------------------

Reply 1 TTL: 30 VLAN: 0 RTT: 4

Reply 2 TTL: 30 VLAN: 0 RTT: 1

Reply 3 TTL: 30 VLAN: 0 RTT: 1

Reply 4 TTL: 30 VLAN: 0 RTT: 1

Reply 5 TTL: 30 VLAN: 0 RTT: 1

----------------------------------------------

5 packets transmitted; 0 packets lost (0%) RTT (ms) min/average/max: 1 / 1 / 4

traffic-generator IP_ADDR 1-10000 36-1500 [0-102] - IP packets/second

packet_length [VLAN]

Switches traffic generator on. Apart from IP-address you have to set the number of packets per

second, the size of packets and number of VLAN which routing table should be used by the traffic

generator.

traffic-generator off - Disable traffic generator

Switches traffic generator off.

Traffic generator sends same PING requests to the relevant address. In difference to PING the generator operates

in the background mode and does not interfere with entering the commands, features no statistics and is intended

for diagnostics with reference to counters on interfaces.

The following command displays performance of different protocols and should be used for advanced debugging.

2.15.13 Powering off

To power the router off the Power Supply should be disconnected from AC power. If the device is

connector of the router.

2.15.14 Safety instructions for operations

 Connect and disconnect any cables only when router is powers off;

 Do not block ventilation holes of the router, as this could lead to overheating of the device;

 Clean the router by dry cloth, do not use liquid wipes or cleaners;

 Router must be installed on a stable and flat surface;

 Do not install on the router or near any glasses, vases and other containers containing liquid;

 Do not try to repair the router and not use it for other purposes;

 There no serviceable components inside, opening a case is not permitted;

 Servicing by qualified personnel only;

2.15.15 Actions in case of fire

In case of fire or any smoke of the router please immediately power off the device and if necessary, use

extinguishing tools that are intended for electrical circuits.