User guide

Unfolding the wheelchair package

Attach the wheelchair bag to the Rollz Motion before you leave. If you want to

take a break, just unfold the wheelchair package and click it into the frame.

a. Take the handle of the wheelchair package and pull up the backrest to

the maximum setting and towards the front until halfway up the frame

(Fig. 21). Then pull the backrest back until the locking bolts click into the

guide rails on the frame (Fig. 24).

b. Turn the adjustment knobs for the handles anti-clockwise and turn the

handles around via the outside, until they are pointing towards the

back. Adjust the height for the person pushing the wheelchair and turn

the adjustment knobs clockwise to tighten (Fig. 25). (See adjusting/

posture).

c. The footrests are located in the wheelchair bag. Place the footrests at

the front of the Rollz Motion into the footrest holders by pushing them

down from the top of the footrest holders (Fig. 26).

d. The armrests are located inside the wheelchair bag. Place them around

the frame on the spot where your arms rest. Secure them by using the

Velcro on the bottom of the armrests (Fig. 27).

PLEASE NOTE: If the locking bolts do not smoothly glide into the guide rails on

the frame, push the backrest back to the front until halfway up the frame and

try again. Do not put any pressure, as this may damage the Rollz wheelchair

function. Please contact your supplier if it does not work after several attempts.

PLEASE NOTE: Do not exert any force if the footrests fail to smoothly glide into

the footrest holders. Pull them up and try again. Please contact your supplier if it

does not work after several attempts.

PLEASE NOTE: Before you sit down, always check that the locking bolts are

correctly secured in the guide rails. Do not sit down if one of the locking bolts is

not secured. Instead, try again to fit the seat.