Specifications

Page 14 RollSeal SC-325 & SC-650 Controllers Part No 4801-5156 Rev 10-2014
SOFTWARE VERSION AND MODEL NUMBER
When the Smart Controller is turned off and
subsequently on again, the Display Indicator will
flash the current software version and model
number in the display. This will remain on the
display about two seconds. Then the display will
show the Actual Position of the door.
ACTUAL POSITION READING
When displaying the actual position of the door,
the Display Indicator will appear similar to the
diagram on the right. In the example shown, the
door is in a position of 240 counts.
UNKNOWN POSITION INDICATION
There are occasions when the controller may
not know the exact position of the door, for
example, when returning from the Jog Mode.
In these cases the Display Indicator will
display a series of three bars as shown at the
right. This is known as the Unknown Position
Indication.
When the door is actuated, the door will proceed to the full open position, however the speed of the door
will be reduced. When the door has returned from the home switch position to the open limit position,
the display will show the actual position of the door. This indicates that the door has reset its position
and is ready for normal operation.
ASSUMED POSITION INDICATION
When the controller is first turned on, the display will flash between a numerical actual position reading
and the unknown position indication. This flashing indicates the controller has assumed the current
position of the door. When the control button is pressed, the controller will open at full speed to the
open limit of the door. Then the door will proceed to the Home switch to verify the position reading and
return to the open limit position. This operation takes place to verify that the door was not manually
adjusted during the time that power was removed from the controller.
JOG MODE INDICATION
When the Smart Controller is in the Jog Mode,
the display will indicate “J O G” as shown at
the right. See Section 7 for a description of the
Jog Mode.
J O G
Jog Mode
- - -
- --
Unknown Position Indication
2 4 0
Actual Position Reading
S 8 # #
Software Version Number
Model Number
8 = SC-325 Model
9 = SC-650 Model