Owner's Manual
FRONT PANEL DESCRIPTION
www.rolls.com
RS81B
Quartz PLL Synthesized AM/FM RDS Tuner
HEADPHONE
HEADPHONE
OUTPUT
DIRECT
TUNING
M3 / 3
M4 / 4
M1 / 1
M2 / 2
M6 / 6 M7 / 7
M8 / 8 M9 / 9 M10 / 10
M5 / 5
0
TA PTY MO / ST MEM. UP
BAND
DISP AF MEMORY SLEEP DN UP
SIGNAL
STRENGHT
- MEM. UP: Increments up Presets. If the tuner is stepped beyond the
highest number preset stored, it will “wrap around” and step back to the
lowest numbered preset.
- BAND: Switch for AM or FM (FM 1 / FM 2 / AM)
- Tuning + / - : Increases or Decreases the tuner frequency each time it is
pressed. Press in for 2 seconds for automatic scan searching. After a sta-
tion is received, it will stop automatically and start to play.
- MO/ST: Selects between Stereo and Mono operation (FM mode only).
- DISP: Displays the current RDS information (if available) from the cur-
rent station.
-DIRECT: Press to directly select a radio frequency. For example, to di-
rectly select station107.7, simply press “DIRECT” + number “1077”.
-Headphone Level: Adjusts the signal level of the Headphone Out.
-Headphone Out: 1/8” Tip-Ring-Sleeve stereo jack for connection to ste-
reo headphones. The use of MONO jacks will permanently damage the
RS81B. Make sure you are using a stereo jack.
-Power Switch: Applies power to the RS81B.
- SIGNAL STRENGTH: This is a general signal strength meter. It is not cali-
brated to a specic level. It will indicate the general strength of a signal
coming into the RS81B.
Radio Memory Function
-The 30 Radio presets are in 3 sections: FM 1 x 10 / FM 2 x 10 / AM x 10
-First select the channel which wants to be stored
-Press “ MEMORY “
-Press “1 ~ 10” To select the channel number for preset memory.
-Press “ MEMORY “ again to conrm the memory. LCD shows “CH1 ~ 10”.
-Repeat above steps to store more channels. Up to 10 channels can be
stored per section.