Owner's Manual
MS211
MADE IN USA
www.rolls.com
The MS211 rear panel has two screw holes for convenient mounting.
OPERATION: To mute a microphone signal, connect the balanced XLR cable to the microphone, and to the female input jack on
the MS211. Connect the XLR male output jack to another cable, and its end to your next device. Press and hold the switch for
the amount of time you want the signal muted. To hear the mic signal again, release the switch. The MS211 can be congured to
“push to talk” or “Push to mute” by selecting the internal switch. The switch can be accessed from the side of the MS211.
Switch for changing the
orientation of the MS211
from Push to Talk when
the switch is in, or Push to
Mute when the switch is
out.
Momentary switch
XLR jacks: Female
input, Male output