Instructions / Assembly

Install the Gear Boxes

1. With the truck body still on its back, locate the two holes on either side of the

truck body with the white gearbox connector and yellow gearbox connector

2. Slide the left gear box (1) onto the rear axle with the white gears facing out

until it sits completely in the gear box bracket and the silver cylindrical end ts

completely into the hole that leads to the battery compartment

3. Connect the connector from the truck body with the connector on the gear

box. Ensure the yellow gear box connector is connected to the yellow engine

connector, and the white gear box connector is connected to the white engine

connector

4. Slide the wiring connection back into the battery compartment

5. Repeat the same steps on the other side of the truck with the right gear box (2)