2V Chevy Silverado Owner’s Manual and Assembly Instructions (2-Person Assembly Recommended) Model #: W461-C W461-C02 W461-C03 W461-CO2-F Read and understand the entire manual before assembly and operation. The vehicle must be assembled by an adult who has read and understands the instructions. Made in China. Styles and colors may vary. Do not return to store. Call 1-888-982-9309 for assistance and replacement parts. IMPORTANT: Save this manual with your sales receipt.
Introduction Thank you for purchasing this vehicle from Aria Child. We hope the rider enjoys it for miles to come. Please read this instruction guide carefully before assembling and operating the vehicle. Please have your model number and serial number ready before calling. Please have proof of purchase. Keep your sales receipt or register your product at www.ariachild.com. Please contact Aria Child Customer Service with any questions.
IMPORTANT! YOU MUST CHARGE THE BATTERY FOR 24 HOURS BEFORE FIRST USE! Charge the battery after each use. Charge the battery at least once a month, even if the vehicle is not in use. DO NOT RETURN THIS ITEM TO THE STORE! Contact Customer Service if you need assistance or replacement parts. Please have your model number and serial number ready before calling. Please have proof of purchase. Keep your sales receipt or register your product at www.ariachild.com as we may require proof of purchase.
Table of Contents Safety...........................................................5 Parts ...........................................................7 Charging Instructions................................8 Assemble the Rear Support Bars.............9 Install the Rear Support Bars..................10 Install the Rear Wheel Axle......................11 Install the Gear Boxes..............................12 Assemble the Rear Wheels......................13 Assemble the Front Wheels.....................
Safety 5 WARNING: SAFETY RIDING RULES PREVENT INJURIES AND DEATHS: NEVER LEAVE CHILD UNATTENDED. ALWAYS keep child in view when child is in vehicle. Direct adult supervision is REQUIRED. NEVER use on roadways, near cars, on or near steep inclines or steps, swimming pools or other bodies of water. ALWAYS wear shoes. ALWAYS sit on the seat. NEVER allow more than (2) riders in the vehicle. The user must follow all safety rules and guidelines, or serious injury or death may occur to the user.
Safety (Continued) WARNING: BATTERY SAFETY • Battery posts, terminals and related accessories contain lead and lead compound (asic) chemicals known to the state of California to cause cancer, reproductive harm, and are toxic and corrosive. DO NOT open the battery. • Contact exposure to battery leakage (lead acid) may cause serious injury. Immediately contact your doctor if exposure occurs. If the chemical is on the skin, flush immediately with cool water for 15 minutes.
Parts 7 6 21 7 3 8 4 5 9 23 18 17 10 19 11 12 14 22 16 13 20 2 25 15 24 23 1 Not Included: 1. Gear Box (Left) 11. Support Lateral Bar 2. Gear Box (Right) 12. Rear Axle 3. 12V Battery 13. Battery Charger 4. Right Mirror 14. Wheel Covers (4) 5. Left Mirror 15. Front Wheels (2) 6. Right Door 16. Rear Wheels (2) 7. Left Door 17. Windshield & Dashboard 21. Manual 8. Seat 18. Tailgate 22. MP3 Cable 9. Right Support Bar 19. Truck Bed 23. Hardware Bag 10.
Charging Instructions 8 YOU MUST CHARGE THE BATTERY FOR 24 HOURS BEFORE THE FIRST USE! ONLY AN ADULT SHOULD HANDLE THE BATTERY AND CHARGER. Connect the Battery: 1. Ensure the vehicle is stopped and turned off. 2. Unlock and remove the seat. 3. Locate the red battery connector (A) that attaches directly to the battery. 4. Connect the red battery connector to the red battery charger connector (B). 5. Replace the seat. B Charge the Battery: 6.
Assemble the Rear Support Bars 9 2-Person Assembly Recommended 1. Locate the right (9) and left (10) support bars and the rear support lateral bar (11) 2. Insert the rear support lateral bar into the square slots on the rear support side bars 3.
Install the Rear Support Bars 1. Carefully flip the truck body on its back for easier assembly (use a soft surface to avoid any scratches or damage) 2. Slide the assembled rear support bars into the square holes on the back of the truck body 3. Align the screw holes on the support bars with the holes on the truck body 4.
Install the Rear Wheel Axle 11 1. 2. 3. 4.
Install the Gear Boxes 1. With the truck body still on its back, locate the two holes on either side of the truck body with the white gearbox connector and yellow gearbox connector 2. Slide the left gear box (1) onto the rear axle with the white gears facing out until it sits completely in the gear box bracket and the silver cylindrical end fits completely into the hole that leads to the battery compartment 3. Connect the connector from the truck body with the connector on the gear box.
Assemble the Rear Wheels 13 Helpful Tip: 1. 2. If you encounter trouble fitting both wheels onto the rear axle, then your rear wheel axle may need to be realigned. Remove both wheels from the rear wheel axle. Using two hands, push down on the rear wheel axle and slide it gently toward the side of the vehicle that needs more room. 1. Locate one of the rear wheels (16) 2. Slide the rear wheel onto the axle with the gear teeth facing inward. Align the gear teeth on the wheel with the gear box 3.
Assemble the Front Wheels 1. Slide a thick washer onto the front axle 2. Slide the front wheel onto the front axle (15). The concave side should face inward 3. Slide the thin washer onto the front axle 4. Using the hex wrench, fasten the nut on the end of the axle and tighten until you can not tighten any more 5. Snap on the wheel cover by aligning the tabs on the cover with the slots on the wheel 6.
Attach the Truck Bed 15 1. Turn the truck right-side up so that the wheels are on the ground 2. Match the 9 screw holes on the truck bed with the holes on the truck body 3.
1. 2. 3. 4. Attach the Mirrors Remove the mirrors (4 and 5) from the plastic bags Remove the screw and nut from the mirror assembly Align the hole on the mirror with the hole on the truck Insert the screw into the hole and fasten the nut with a screwdriver to secure the mirror 5.
Attach the Windshield and Dashboard 17 1. Attach the 2 wire connectors coming from the dashboard (17) body (located in the dashboard) to the 2 wire connectors attached to the truck body 2. Match the plastic inserts on the dashboard with the four slots on the truck body and insert into the truck body at a 45 degree angle 3. Click the windshield/dashboard into place with the mirrors.
Attach the Steering Rod 1. Locate the steering rod (25) 2. Insert the straight end of the steering rod into the steering rod hole on the underside of the dashboard. The steering rod should slide all the way through the dashboard 3.
Assemble the Steering Wheel 19 Helpful Tip: 1. Have one person hold the steering rod in place to prevent it from sliding down while the other person attaches the steering wheel 1. Use a Phillips head screwdriver to remove the screw on the battery compartment of the steering wheel 2. Insert two AA batteries into the battery compartment 3. Replace cover and use the screwdriver to fasten 4. Remove the steering wheel screw and nut from the hole on the steering wheel 5.
Attach the Doors Truck frame post 1. Align the doors with the interior facing the inside of the truck 2. Position the hole on the door over the hole on the truck body and slide the post on the bottom of the door into the hole on the truck body side 3. Insert the screw into the screw hole and fasten to secure. Note: The doors will only fit on the truck body if the dashboard is properly installed over the posts on the truck frame 4.
Attach the Tailgate 21 1. Keeping the tailgate horizontal, align the tailgate with the holes on the truck bed 2.
Battery Attachment 1. Plug in the red battery connector on the 12V battery with the red engine connector after charging the battery for 24 hours. 2. Note: This product uses a recoverable fuse which will automatically cut power to the truck if the current is overflowed.
Attach the Seat 23 1. Align the seat over the battery compartment 2. Ensure the locking mechanism aligns with the holes 3. Slide the hooks onto the back of the seat into the slots on the truck body 4.
Operation Instructions 1. Press the left and right steering wheel buttons for horn (a) and engine sounds (b) 2. Turn the power switch to turn on the truck. The power indicator light will turn on when the truck is on. Turn the power switch again to turn off the truck. 3. Volume Control: Turn right to turn on the MP3 player. Adjusts the volume on the MP3 player 4. Insert the MP3 cable (22) into the MP3 jack and connect to your device. The truck must be turned on to use. 5.
Maintenance 25 Important Battery and Charger Information • Only an adult who has read and understands the safety warnings may handle and operate the battery and battery charger. Keep away from children. • Charge the battery for 24 hours before using the vehicle for the first time. • Recharge the battery immediately after each use. Charge for at least 8-12 hours, but no more than 20 hours. • Charge the battery at least once a month, even if the vehicle is not used or stored.
• • • • • • General Care Regularly inspect all vehicle parts to ensure they are in good working condition. Regularly inspect the charger, cord, plug, and other related parts for damage. Remove any damaged parts and immediately contact Customer Service for replacement parts. See Service and Repairs on Page 23 for more information. DO NOT operate the vehicle if there are any damaged parts. Carefully clean the vehicle with a damp cloth and mild soap. Do not get water in or near any electrical parts.
Troubleshooting Guide 27 Completely read through the manual and troubleshooting guide before contacting Customer Service.
Problem Vehicle needs a push to start Difficulty shifting Motor or gear box making grinding noises Battery will not recharge Battery makes bubbling noise while recharging Charger is warm Potential Cause Loose wires or loose connectors Solution Ensure the battery connectors are securely attached. If wires are loose, contact Consumer Service for repairs “Dead spot” on motor A “dead spot” means electricity is not being delivered to the terminal.
FCC Information 29 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Service and Repairs Do not return this vehicle to the store. If your product requires service, repairs or replacement parts, please contact Aria Child Customer Service. Hours: 9 AM - 5 PM (CST), Monday - Friday Phone: 1-888-982-9309 Email: customerservice@ariachild.com Web: www.ariachild.com For a list of available replacement parts, please visit www.ariachild.com. WE WILL REQUIRE PROOF OF PURCHASE. Please save your sales receipt or register your product at www.ariachild.com.
Warranty 31 Aria Child 12-Volt Limited Warranty • One-year limited warranty from the date of purchase with proof of purchase from an Aria Child certified retailer. • Six month limited warranty on the 12-Volt battery with proof of purchase from an Aria Child certified retailer. • This one-year limited warranty covers the ride-on vehicle against defects in materials and workmanship to the original purchaser. Proof of purchase receipt from an Aria Child certified reseller is required.
Product Registration Fill out the form below and mail it to: Aria Child 1131 W. Blackhawk St. Second Floor Chicago, IL 60642 OR fill out the form online at www.ariachild.com We will use the information provided only for your warranty. We will not sell, rent or share your personal information.
