User's Manual

TX USA

CLONE MODE

PROGRAMMING INSTRUCTIONS

1. Locate the selector switch in the back of the remote. Pry up the cover to expose the selector switch and the

hidden button, see the image above.

2. Select the DIP position brand. Example: Fixed Code.

1 2 3 4 5 6 7 8

3. Press hidden button located at the back of TX USA remote, CLONER led turns on, the clone mode is activated.

4. On the CLONER remote, press the button you desire to be learnt ONCE AND RELEASE, led Lights off.

5. Close together the CLONER transmitter with the ORIGINAL transmitter.

6. Press and hold the button on the ORIGINAL transmitter until led flashes.

Note: If the remote was copied correctly, the led on the CLONER will flash 3 times.

To use another button, repeat steps 1 to 6.

Table 2: Clone mode.

1 2 3 4 5 6 7 8

DIP

Code

LINEAR2

310MHz

Code select

by position 1

to 8 on

DIP12

1 2 3 4 5 6 7 8

DIP

Code

DIGI CODE

310MHz

Code select

by position 1

to 10 on

DIP12

1 2 3 4 5 6 7 8

Encrypted

Code

Liftmaster

LOBAS

315MHz