Operation Manual

46
Choosing a Startup Image
Turn the power on, and set the camera to the PLAYBACK mode
(
page 13).
Open the menu.
 Press the MENU button, then use the four-way control to select S.Image
(
) and press the SET button.
Press
or to select the image you want, then press the SET button
to apply the choice.
 A message “Completed” appears.
Set the camera to the Setup Menu (
page 16).
Press
or to select S.Image
(
) then press or the SET
button.
Press
or to select a desired
option and press the SET button to
apply the setting.
[Off]: Disable the start-up image.
[System]: Use camera default image.
[My image]: Use the image that you just specified in step 3.
Press the MENU button to close the menu.
 The start-up image will not be deleted even if the original image is deleted or
memory formatted.
3
1
2
4
5
6
7
Caution
Downloaded from www.Manualslib.com manuals search engine