Gebrauchsanleitung Instruction Manual Manuel d’Utilisation Manual del Usuario Rollei Prego dp5200
Digital Camera >> FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
Microsoft ® and Windows ® are U.S. registered trademarks of Microsoft Corporation. Pentium® is a registered trademark of Intel Corporation. Macintosh is a trademark of Apple Computer, Inc. SDTM is a trademark. Other names and products may be trademarks or registered trademarks of their respective owners. User’s Manual >> TRADEMARK INFORMATION READ THIS FIRST Notice: 1. Product design and specifications are subject to change without notice.
Digital Camera >> 4-E Safety Instructions Read and understand all Warnings and Cautions before using this product. WARNING If foreign objects or water have entered the camera, turn the power OFF and remove the battery and the AC power adapter. Continued use in this state might cause fire or electric shock. Consult the store of purchase. If the camera has fallen or its case has been damaged, turn the power OFF and remove the battery and the AC power adapter.
Insert the battery paying careful attention to the polarity (+ or –) of the terminals. Inserting the battery with its polarities inverted might cause fire and injury, or damage to the surrounding areas due to the battery rupturing or leaking. Do not fire the flash close to anyone’s eyes. This might cause damage to the person’s eyesight. Do not subject the LCD monitor to impact. This might damage the glass on the screen or cause the internal fluid to leak.
Digital Camera >> Notes on Battery Usage When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: Use only the specified battery (3.7V). Avoid using the battery in extremely cold environments as low temperatures can shorten the battery life and reduce camera performance.
9 INTRODUCTION 9 11 Overview Package Contents 12 GETTING TO KNOW THE CAMERA 12 13 15 16 Front View Rear View Status LED Indicator LCD Monitor Icons User’s Manual >> CONTENTS 18 GETTING STARTED 18 19 20 22 23 24 25 26 27 Attaching the Camera Strap Inserting and Removing the Battery (Optional Accessory) Charging the Battery Inserting and Removing the SD Card (Optional Accessory) Turning the Power On/Off Setting the Date and Time Choosing the Language Formatting the SD Card Setting Image Resolution and
Digital Camera >> 40 [ 40 41 43 44 45 46 47 48 50 52 ] PLAYBACK MODE Playing Back Still Images Playing Back Video Clips Playing Back Still Images/Video Clips on a TV Attaching Voice Memos Thumbnail Display Zoom Playback Slideshow Display Protecting Images DPOF Settings [ ] Erasing Images 54 MENU OPTIONS 54 57 60 61 62 63 65 Still Image Menu (Picture) Still Image Menu (Function) Movie Menu (Picture) Movie Menu (Function) Playback Menu Setup Menu (In Photography Mode) Setup Menu (In Playback Mode) 67 TRA
Overview Congratulations on your purchase of the new digital camera. Capturing high-quality digital pictures is fast and easy with this state-of-the-art smart camera. Equipped with a 5.2 Mega pixels CCD, this camera is capable of capturing pictures with a resolution of up to 2560 x 1920 pixels. User’s Manual >> INTRODUCTION Other cool features provided by the camera include the following: LCD monitor 2.5" LTPS TFT color LCD monitor makes it easy to frame your subject when taking pictures.
Digital Camera >> Voice memo - Camera settings Thumbnail display TV and PC connection DPOF settings - 10-E A voice memo can be recorded once for 30 seconds at photography mode immediately following a still image captured or at playback mode while viewing the picture. Have more control over picture quality by adjusting the menu options. Display in sets of nine pictures on the LCD monitor for easier and quicker selection of pictures.
Carefully unpack your camera and ensure that you have the following items.
Digital Camera >> GETTING TO KNOW THE CAMERA Front View # Name 1. Shutter button 2. POWER button 3. Flash 4. Mode switch Description Focuses and locks the exposure of the camera when pressed halfway down, and takes the picture when pressed all the way down. Turns the camera power on and off. Provides flash illumination. Sets the camera mode. Selects this when taking still images. Selects this when recording video clips. Performs image playback and deletion.
User’s Manual >> Rear View # Name 1. LCD monitor 2. Display button 3. Status LED 4. Zoom in button Description Provides menu information to operate the camera, and previews the picture before taking it and review it afterwards. Turns the LCD monitor display and live view on and off. Displays the camera current state. Zooms the lens to telephoto position. Zoom out button Zooms the lens to wide-angle position. 5. MENU button Toggles OSD menu on and off. 6.
Digital Camera >> SET /Direction button # Name 1. button Description Scrolls upwards. Focus button Allows you to choose the appropriate focus setting. 2. button Flash button 3. button Scrolls right. Allows you to choose the appropriate flash setting. Scrolls downwards. 4. Self-timer button Allows you to toggle the self-timer on and off, selects the desired self-timer mode. button Scrolls left.
This describes the color and state of the status LED. Color State During power off On The completion of battery charge. Flashing During connection to a PC AE or AF is locked with the shutter button held halfway. - Battery charging in progress. - - On Battery charging error. Writing to SD card in progress. In communication to PC. (SD card is inserted.) Flashing - Green Red Orange During photography On Flashing - When the image is not in focus. Charging of the flash in progress.
Digital Camera >> 16-E LCD Monitor Icons Photography mode [ ] 1. Zoom status 2. Voice memo 3. Remaining battery status ] Full battery power [ ] Medium battery power [ ] Low battery power [ ] No battery power [ 4. Flash icon [Blank] Auto ] Red-eye Reduction [ ] Forced Flash [ ] Suppressed Flash [ ] Night Scene [ ] Histogram 5. [ 6. Focus area (When the shutter button is pressed halfway.) 7. Capture mode icon [Blank] Single ] Continuous [ [ AEB ] Auto Exp. 8.
1. 2. 3. 4. 5. 6. 7. 8. 9. [ ] Movie mode Zoom status Remaining battery status Image size Possible recording time / elapsed time Quality Recording indicator Self-timer icon Focus icon Playback mode [ 1. 2. 3. 4. 5. ] User’s Manual >> Photography mode [ ] -Still image playback Mode icon File number Folder number Protect icon Voice memo Playback mode [ ]-Video playback 1. 2. 3. 4. 5. 6. 7. 8.
Digital Camera >> 18-E GETTING STARTED Attaching the Camera Strap Attach the camera strap as shown in the illustration.
We highly recommend using specified rechargeable lithium-ion battery (3.7V) to fully demonstrate this camera’s function. Charge the battery before using the camera. Make sure that the power of the camera is off before inserting or removing the battery. Inserting the Battery User’s Manual >> Inserting and Removing the Battery (Optional Accessory) 1. Open the battery/SD card cover. 2. Insert the battery in the correct orientation shown.
Digital Camera >> Charging the Battery Using the optional AC power adapter may charge the battery or operate the camera as power supply. Make sure that the power of the camera is off and then insert the battery before starting. 1. Insert the conversion adapter into the conversion adapter terminal of the camera as shown in the illustration. 2. Insert one end of the AC power adapter into the DC IN terminal of the conversion adapter. 3. Insert the other end of the AC power adapter into a wall outlet.
User’s Manual >> This camera must be used with specified AC power adapter. Damage caused by the use of an incorrect adapter is not covered under the warranty. When the charging is not started even if following the above procedure, turn the power on at any mode after LCD monitor turns on, and then turn the power off. The battery may feel warm after it has been charged or immediately after being used. This is normal and not a malfunction.
Digital Camera >> Inserting and Removing the SD Card (Optional Accessory) Images photographed with this camera will be stored on the SD card. Without inserting the SD card, you cannot take photographs using the camera. Before inserting or removing the SD card, make sure that the power of the camera is off. Inserting the SD card 1. Open the battery/SD card cover. 2. Insert the SD card in the correct orientation shown.
Load the battery and insert an SD card before starting. Turning the power on Press the POWER button to turn the power on. The status LED lights green and the camera is initiated. When the power is turned on, the camera will start in the mode that was set. User’s Manual >> Turning the Power On/Off Turning the power off Press the POWER button to turn the power off. The power is turned off automatically when the camera has not been operated for a fixed period time.
Digital Camera >> Setting the Date and Time The date/time needs to be set if/when: Camera is turned on for the first time. Camera is turned on after leaving the camera without the battery for an extended period of time. When the date and time information is not displayed on the LCD monitor, follow these steps to set the correct date and time. 1. Slide the mode switch to [ ] or [ ]. 2. Press the MENU button and select [Setup] menu with the button 3.
Specify in which language menus and messages are to be displayed on the LCD monitor. ] or [ ] or 1. Slide the mode switch to [ [ ]. 2. Press the MENU button and select [Setup] menu with the button. If no images/video clips are recorded on the SD card, press the MENU button and then [Setup] menu is displayed. 3. Select [Language] with the / buttons and press the SET button. The Language setting screen will be displayed. 4. Select the displayed language with the / buttons and press the SET button.
Digital Camera >> Formatting the SD Card This erases all of the images and folders that have been recorded on the SD card. Formatting is not possible when the SD card in the locked condition. 1. Slide the mode switch to [ ]. 2. Press the MENU button. [Setup] menu is displayed. If images/video clips are recorded on the SD card, press the button after the MENU button is pressed. 3. Select [Format] with the / buttons, then press the SET button. 4.
Resolution and quality settings determine the pixel size (dimension), image file size, and compression ratio for your images. These settings affect the number of images that can be stored on a memory card. As you get to know the camera, it is recommended that you try each quality and resolution setting to get an appreciation for the effects that these settings will have on your images.
Digital Camera >> Possible number of shots (still image) The table shows the approximate shots that you can take at each setting based on an optional SD card. SD card capacity Image size Quality 32MB 64MB 128MB 256MB 512MB (1.
[ ] Still Image Mode Auto photography is a typical method of photography. Photographs can be taken simply because the exposure (the combination of shutter speed and aperture setting) is controlled automatically to suit the photographic conditions. You can use the 2.5" LCD monitor to compose the images. Make sure that the battery and SD card are inserted before taking photographs. User’s Manual >> PHOTOGRAPHY MODE 1. Press the POWER button to turn the power on. 2. Slide the mode switch to [ ].
Digital Camera >> Recording Voice Memos A voice memo can be recorded once for 30 seconds at still image mode immediately following a still image captured or at playback mode while viewing the picture. 1. Slide the mode switch to [ ]. 2. Press the MENU button, and select the [Function] menu with the button. [Function] of the still image menu is displayed. 3. Select [VOICE MEMO] with the / Adjust buttons, and press the SET button. 4. Select [ON] with the / buttons, and press the SET button. 5.
Zoom photography allows you to take zoom photographs up to 3 times the size or wide-angle photography depending on the distance up to the subject. You can also enlarge the center of the screen and take photographs in the digital zoom mode. 1. Slide the mode switch to [ ] or [ ]. 2. If required, turn on the LCD monitor by pressing the button. 3. Compose the picture with the zoom button. Pressing the button zooms in on the subject, and enlarges the subject on the LCD monitor.
Digital Camera >> Using the Digital Zoom Using a combination of 3 times optical zoom and 4.0 times digital zoom permits zoom photography of up to 12 times to suit the subject and the distance. The digital zoom is a compelling feature, the more an image is enlarged (zoomed), the more pixilated (grainer) the image will appear. 1. Slide the mode switch to [ ] or [ ]. 2. Turn on the LCD monitor by pressing the 3. To enable the digital zoom: a. Press the MENU button. button. b.
Set the flash for taking photographs. The flash firing mode can be set to suit for the photographic conditions. 1. Slide the mode switch to [ ]. button to select the desired 2. Toggle the flash mode. User’s Manual >> Setting the Flash Each press of the button moves the icon one step through the sequence and displays it on the screen.
Digital Camera >> The table below will help you choose the appropriate flash mode: Flash mode Description [ Blank] Auto The flash fires automatically to suit the photographic conditions. [ ] Red-eye Reduction Use this mode to reduce the red-eye phenomenon when you want to take naturallooking photographs of people and animals in low-light conditions. When taking photographs, the red-eye phenomenon can be reduced by asking the subject (person) to look at the camera or get as close to the camera as possible.
Photographs can be taken with the distance to the subject set by auto focus, [ ] macro or [ ] infinity. The settings will be maintained even when the power is turned off or when Auto OFF is activated. 1. Slide the mode switch to [ ] or [ ]. button to select the desired 2. Toggle the focus mode. Each press of the button moves the icon one step through the sequence and displays it on the screen.
Digital Camera >> Setting the Self-timer This setting allows photographs to be taken with the self-timer. 1. Slide the mode switch to [ 2. Toggle the ] or [ ]. button to select the setting. Each press of the button moves the icon one step through the sequence and displays it on the screen. OFF [ 10s] 10 sec. [ 2s ] 2 sec. [ 10+2s ] 10+2 sec. For the [ ] mode and capture mode ([Continuous] and [Auto Exp.]) OFF [ 10s ] 10 sec. [ 2s ] 2 sec. 3.
Photographs can be taken with the overall screen intentionally made brighter or darker. These settings are used when a suitable brightness (exposure) cannot otherwise be obtained in circumstance where the difference in brightness between the subject and the background (the contrast) is large, or when the subject that you want to photograph is very small within the screen. Exposure can be set in 0.3 EV units. 1.
Digital Camera >> Effective Subjects and Set Values + (positive) compensation * Printed matter comprising black text on whitish paper * Backlighting * Bright scenes or strong reflected light such as ski slopes * When the sky accounts for a large area on the screen - (negative) compensation * People illuminated by a spotlight, in particular, against dark background * Printed matter comprising white text on blackish paper * Weak reflecting bodies such as evergreen trees or darkish leaves Backlight correction
] Movie Mode This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pixels. Voice can also be recorded. 1. Slide the mode switch to [ ]. 2. Compose the picture with the zoom button. 3. Press the shutter button. The recording of the video clip will start. Pressing the shutter button one more time will end the recording of the video clip, and record the image into the SD card. The recording time depends on the storage size and the subject of the image to be recorded.
Digital Camera >> [ ] PLAYBACK MODE Playing Back Still Images You can play back the still images on an LCD monitor. Insert the SD card into the camera and turn on the power before starting. 1. Slide the mode switch to [ ]. The last image appears on the screen. 2. The images can be fed in reverse or fed forward with the / buttons. Image Display Information You can switch the state of the information display by pressing the button when playing button back images.
You can play back video clips recorded on the camera. You can also play back voice. 1. Slide the mode switch to [ ]. The last image appears on the screen. 2. Select the desired video clip with the / 3. Press the SET button. buttons. User’s Manual >> Playing Back Video Clips A press of the / buttons during playback allows fast forward play / fast reverse play. To stop video playback: Press the button. This stops playback and returns to the start of the video clip.
Digital Camera >> Button Operations During Playback During a Pause Forward play button Each press of the button moves the operation one step 1-frame feed in the sequence of 2 times fast forward play, 4 times fast forward play, and regular play. Reverse play button Each press of the button moves the operation one step Reverse in the sequence of 2 times 1-frame feed fast reverse play, 4 times fast reverse play, and regular play. button button SET button During a Stop The previous image is displayed.
You can also playback your images on a TV screen. Before connecting to any devices, make sure to select NTSC / PAL system to match the video output system of the video equipment you are going to connect to the camera, then turn all connected devices off. It is also recommended to use the AC power adapter while transferring the recorded images and video files. User’s Manual >> Playing Back Still Images/Video Clips on a TV 1. Slide the mode switch to [ ]. 2.
Digital Camera >> Attaching Voice Memos A maximum of 30 seconds of audio can be recorded like a memo for photographed still images. The voice memo can be recorded only once. 1. Slide the mode switch to [ ]. The last image appears on the screen. 2. Select the image that you want to attach the voice memo with the / buttons. 3. Press the shutter button. [VOICE RECORDING] is displayed on the screen and recording starts. 4. To stop recording voice memo during recording, press the shutter button again.
This function allows you to view 9 thumbnail images on the LCD monitor at the same time, which can quickly search for the image that you want. 1. Slide the mode switch to [ ]. The last image appears on the screen. 2. Press the button. The images are displayed in the thumbnail display. Images that have been selected with the / / / buttons will be indicated by a green frame. When there are ten or more images, scroll the screen with the / buttons. 3.
Digital Camera >> Zoom Playback Images that are being play back can be enlarged and displayed in 2 levels of 2 times and 4 times enlargement. This mode also allows you to enlarge your image on the selected portion of the image to check for small details. 1. Slide the mode switch to [ ]. 2. Press the / buttons to select the image you want to enlarge. You can also select the image you want to enlarge from the thumbnail display. 3. Adjust the zoom ratio with the / buttons.
The slideshow function enables you to playback your still images automatically in order one image at a time. 1. Slide the mode switch to [ ]. 2. Press the MENU button. The playback menu is displayed. 3. Select [Slide Show] with the / buttons, and press the SET button. The slideshow starts. 4. To stop the slide show during playback, press the SET button. The image is displayed on screen when you press the SET button.
Digital Camera >> Protecting Images Set the data to read-only to prevent images from being erased by mistake. Protecting Images 1. Slide the mode switch to [ ]. 2. Select the image that you want to protect with the / buttons. 3. Press the MENU button. The playback menu is displayed. 4. Select [Protect] with the / buttons, and press the SET button. 5. Select [Single] or [All] with the / buttons, and press the SET button. 6. Select [Set] with the / buttons, and press the SET button.
To cancel protection for only one image, display the image that you want to remove the image protection. 1. Select [Protect] with the / buttons from the playback menu, and press the SET button. 2. Select [Single] or [All] with the / buttons, and press the SET button. 3. Select [Cancel Protect] with the / buttons, and press the SET button. The removal of image protection is executed and the camera returns to the play mode.
Digital Camera >> DPOF Settings DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer. When the printer starts printing, it will read the embedded information on the memory card and print the specified images. 1. Slide the mode switch to [ ]. 2.
User’s Manual >> 9. Select date to [ON] or [OFF] with the / buttons, and press the SET button. ON: The date of the photograph will also be printed. OFF: The date of the photograph will not be printed. 10. Select [Print Enable] with the / buttons, and press the SET button. 11. Select [Execute] with the / buttons, and press the SET button. This creates a file containing the DPOF information, and when the operation is finished, the screen returns to the playback screen.
Digital Camera >> [ ] Erasing Images Erasing at Photography Mode (Quick Delete Function) Quick delete function enables you to erase the image during photography. The quick delete menu provides you to directly erase the last image without further settings. 1. Slide the mode switch to [ ] or [ ]. 2. Press the button. The last image and quick delete menu appear on the screen. 3. Press the SET button to erase the image. To not erase, select [Cancel], and press the SET button.
Even if you take photographs after erasing an image, the file number is assigned the next number of the very last one before the image was erased. User’s Manual >> 5. Select [Execute] with the / buttons, and press the SET button. To not erase, select [Cancel], and press the SET button. Erasing selected images This erases a number of selected images. 1. Slide the mode switch to [ ]. button. 2. Press the The deletion menu will be displayed. 3. Select [Select] with the / buttons, and press the SET button.
Digital Camera >> MENU OPTIONS Still Image Menu (Picture) This menu is for the basic settings to be used when taking still images. 1. Slide the mode switch to [ ]. 2. Press the MENU button. [Picture] of the still image menu is displayed. 3. Select the desired [Picture] option item with the / buttons, and press the SET button to enter its respective menu. 4. Select the desired setting with the / buttons, and press the SET button. 5. To exit from the still image menu, press the MENU button.
This sets the size of the image that will be photographed. [ ] 2560 x 1920: 2560 x 1920 pixels (5M) [ ] 2048 x 1536: 2048 x 1536 pixels (3M) ] 1280 x 960: 1280 x 960 pixels (1.2M) [ ] 640 x 480: 640 x 480 pixels (VGA) [ Quality This sets the quality (compression rate) at which the image is taken. ] Fine: Low compression rate. [ [ ] Standard: Normal [ ] Economy: High compression rate User’s Manual >> Size Sharpness This sets the sharpness of the image that will be photographed.
Digital Camera >> White Balance This sets the white balance photographing under a variety of lighting conditions and permits photographs to be taken that approach the conditions that are seen by the human eye. [ Blank ] Auto: Automatic adjustment. [ ] Incandescent: Photography under incandescent lighting. [ 1 ] Fluorescent 1: Photography under a daylight fluorescent tube with a bluish cast. [ 2 ] Fluorescent 2: Photography under a daylight white fluorescent tube with a reddish cast.
1. Slide the mode switch to [ ]. 2. Press the MENU button, and select the [Function] menu with the button. [Function] of the still image menu is displayed. 3. Select the desired [Function] option item with the / buttons, and press the SET button to enter its respective menu. 4. Select the desired setting with the / buttons, and press the SET button. 5. To exit from the still image menu, press the MENU button.
Digital Camera >> Voice Memo A voice memo can be recorded for 30 seconds immediately following still single image photography. This feature is also available during playback mode. Refer to section in this manual titled "Recording Voice Memos" for further details. ON: Enable voice memo. OFF: Disable voice memo. When voice memo is set to on, the preview setting is also fixed to on. LCD Bright. Select a brightness level for the LCD monitor. The LCD becomes brighter with the button and darker with the button.
This sets whether or not to display the photographed image on the screen immediately after the picture is taken. ON: Displayed when images are being recorded on the SD card. OFF: Does not display. A photographed image is displayed on the LCD monitor for 2 seconds. Pressing the shutter button during preview cancels the operation. When preview is set to off, the voice memo setting is also fixed to off. User’s Manual >> Preview Date Print The date of recording can be printed directly on the still images.
Digital Camera >> Movie Menu (Picture) This menu is for the basic settings to be used when recording video clips. 1. Slide the mode switch to [ ]. 2. Press the MENU button. [Picture] of the movie menu is displayed. 3. Select the desired [Picture] option item with the / buttons, and press the SET button to enter its respective menu. 4. Select the desired setting with the / buttons, and press the SET button. 5. To exit from the movie menu, press the MENU button.
1. Slide the mode switch to [ ]. 2. Press the MENU button, and select the [Function] menu with the button. [Function] of the movie menu is displayed. 3. Select the desired [Function] option item with the / buttons, and press the SET button to enter its respective menu. 4. Select the desired setting with the / buttons, and press the SET button. 5. To exit from the movie menu, press the MENU button. Digital Zoom Adjust User’s Manual >> Movie Menu (Function) LCD Bright.
Digital Camera >> Playback Menu In the [ ] mode, set which settings are to be used for playback. 1. Slide the mode switch to [ ]. 2. Press the MENU button. The playback menu is displayed. 3. Select the desired option item with the / buttons, and press the SET button to enter its respective menu. 4. Select the desired setting with the / buttons, and press the SET button. 5. To exit from the playback menu, press the MENU button.
Set your camera’s operating environment. ] or [ ]. 1. Slide the mode switch to [ 2. Press the MENU button, and select the [Setup] menu with the button. [Setup] of the photography menu is displayed. 3. Select the desired [Setup] option item with the / buttons, and press the SET button to enter its respective menu. 4. Select the desired setting with the / buttons, and press the SET button. 5. To exit from the photography menu, press the MENU button.
Digital Camera >> Date/Time This sets the date and the time. Refer to section in this manual titled “Setting the Date and Time” for further details. Auto OFF If no operation is performed for a specific period of time, the power to the camera is automatically turned off. This feature is useful to reduce battery wear. 1 Min.: When the camera has not been operated, it turns the power off after 1 minute. 2 Min.: When the camera has not been operated, it turns the power off after 2 minutes. 3 Min.
1. Slide the mode switch to [ ]. 2. Press the MENU button. [Setup] of the playback menu is displayed. If images/video clips are recorded on the SD card, press the button after the MENU button is pressed. 3. Select the desired [Setup] option item with the / buttons, and press the SET button to enter its respective menu. 4. Select the desired setting with the / buttons, and press the SET button. 5. To exit from the playback menu, press the MENU button.
Digital Camera >> Fr. No. Reset This creates a new folder. The photographed images are recorded to the newly created folder from number 0001. Cancel: Does not reset the file number. Execute:Resets the file number and creates a new folder. Card Info. This allows a check of the free capacity of the SD card as well as other information. System Info. This displays the firmware version of the camera. Language This sets the language that is displayed on the LCD monitor.
To transfer images/video clips from the camera to your computer, follow these steps: Step 1: Installing the USB driver (Windows 98 and Mac OS 8.
Digital Camera >> Step 1: Installing the USB Driver Windows 98 computers The USB driver on the CD-ROM is exclusively for Windows 98 computers. Installing the USB driver on computers running Windows 2000/ME/XP is not necessary. 1. Insert the CD-ROM that came with the camera into your CD-ROM drive. The welcome screen appears. 2. Click “INSTALL USB DRIVER”. Follow the on-screen instructions to complete the installation. After the USB driver has been installed, restart your computer. Macintosh OS 8.
1. Connect one end of the USB cable to the conversion adapter terminal of the camera. If you use the conversion adapter to connect the USB cable, insert the conversion adapter into the conversion adapter terminal of the camera first, and then connect one end of the USB cable to the USB terminal of the conversion adapter. 2. Connect the other end of the USB cable to an available USB port on your computer. User’s Manual >> Step 2: Connecting the Camera to Your Computer 3. Turn on your camera. 4.
Digital Camera >> Step 3: Downloading Images and Video Files When the camera is turned on and connected to your computer, it is considered to be a disk drive, just like a floppy disk or CD. You can download (transfer) images by copying them from the “Removable disk” (“untitled” or “unlabeled” disk on a Macintosh) to your computer hard drive. Windows Open the “removable disk” and subsequent folders by double clicking on them. Your images are inside these folder(s).
PC users will find that PhotoSuite is a very user-friendly image-editing program. With PhotoSuite, you can retouch, compose, and organize your images. It includes a variety of templates, such as photo frames, birthday cards, calendars and more. Get your images ready and explore this amazing program. To install PhotoSuite: User’s Manual >> INSTALLING PHOTOSUITE 1. Insert the CD-ROM that came with the camera into your CD-ROM drive. The welcome screen appears. 2. Click “INSTALL PHOTO SUITE”.
Digital Camera >> INSTALLING PHOTOVISTA PC users will find that PhotoVista is an easy-to-use program that lets you create spectacular 360 degree panoramic images in a snap. When you view these panoramas, you get the experience of being totally immersed in a realistic environment. PhotoVista’s powerful engine quickly and automatically stitches images together, and its intuitive interface will let even a novice get great results in minutes. To install PhotoVista: 1.
User’s Manual >> CONNECTING THE CAMERA TO OTHER DEVICES E-73
Digital Camera >> CAMERA SPECIFICATIONS Item Image sensor Image resolution LCD monitor Image quality Recording media Compression format Image file format Lens Focus range Auto-Focus Shutter speed Image capturing Digital zoom Metering system Exposure compensation White balance 74-E Description 1/2.5" CCD sensor Total number of pixels: approx. 5.2 mega pixels Number of effective pixels: approx. 4.
Description Auto Flash / Red-eye Reduction / Night Scene / Flash Suppressed Flash / Forced Flash Flash effective range 0.5 m -2.7 m ISO sensitivity Equivalent to ISO 50/100/200/Auto Self-timer 10 sec. / 2 sec. / 10+2 sec. Video output NTSC/PAL DC IN 5V terminal (Via conversion adapter) Interface A/V OUT terminal (Via conversion adapter) USB 2.0 (Full speed) Rechargeable Lithium-ion battery (3.7V, optional) Power supply AC power adapter (5V, optional) Dimension (WxHxD) Approx. 88.5 x 54.
