Operation Manual

16
6.3.5. Memory full
IftheSCAN keyispressedintheRecordingmodeandthe
followingwarningappearsontheMultiScannerdisplay,the
usedmemoryisfull.Inthiscaseyouwillhavetorsttransfer
theimagestothecomputerorinsertanewmemorycard
beforescanningfurtherimages.
6.4. Playback
SelectPlaybackintheMainmenutoviewimagesalreadyscanned.Whilstthescannerisswitched
on,youcanreturntotheMainmenubypressingtheMODE buttonortheMenusymbol.Usingthe
/buttonsintheMainmenu,selectthe“Playback”modeandpresstheENTERkey.
or
Note:
• IfthememorycardisremovedorinsertedwhilsttheMultiScannerisswitchedon,a
 warningmessagethatthedevicehastoberestarted,appearsonscreen.Thescannerthen
 switchesoautomatically.Thescannerhastobeswitchedonagaintocontinuescanning.
Film scanner mode Photo scanner mode