Operation Manual

14
6.3.2. Adjusting image brightness and colors
Duringthescanpreviewyouhavetheoptionofchangingthebrightnessvalue(EV)andalsothe
colorvalue.
FirstpresstheENTERbutton.Nowthemonitorwilldisplaythesettingsforthebrightnessandalso
forthecolorsred(R),green(G)andblue(B).ChoosethedesiredvaluebypressingENTERandMODE
andchangethesettingsbypressingandwithintherangeof-2to+2.Toapplythechanges
youhavemade,presstheSCANbutton.
Thesettingswillapplyseparatelytoslides,negativesandphotoprintsandwillbekeptevenifthe
devicehasbeenswitchedo.
6.3.3. Scanning and editing
PresstheSCANkeyduringthescanpreviewtoscantheimage.Theimagethenappearsintheedit
menu.
ThesymbolsintheEditmenuhavethefollowingmeaning:
 Save:Savetherecordedimage.
 Cancel:Canceleditingoftheimage.
 Home:BacktotheMainmenu.
Scanned image
SCAN