ROLLEI DF-S 290 HD -Patent pending- User Manual
Version 1.
Index I. Unpack Rollei DF-S 290 HD Professional Scanner...................2 II. Install film into the film holder..............................................3 III. Quick Start............................................................................6 IV. Operation Guide...................................................................9 Capture…………………………………………………………………………………………………….…….………..9 Playback………………………………………………………………………………………………………………….19 Film Type……………………………………………………………………………………………………….
I. Unpack ROLLEI DF-S 290 HD ROLLEI DF-S 290 HD USB power core Note Negative/Slide Film Holder USB/TV/HDMI cable Rapid Slide Feeder We strongly suggest using a clean, dry, non-alcohol cotton swab to clean the glass surface periodically to produce a clear image during operation. Clean dust from FilmScanner back light, to use the clean brush to wipe the dust.
II. Install film into the film holder Install the Slide into holder 1. Open the slide holder as illustrated 2. Put slide into positive slide slot 3. Close the film holder Install the Negative Film into holder 1. Open the film holder as illustrated 2. Install film into negative film slot 3 3.
Install the Rapid Slide Feeder: 1． Take out the Rapid Slide Feeder from package 2. Put slides into slide slot, use Level bar to eject slide 3.Insert the Slide Feeder into the unit Note To avoid mirror image, follow the serial numbers (from left to right) on top of film when install negative film into holder Figure 1 If the image is upside down [see fig.2], the image can be corrected by Flip function in hard key of device before capture, or enter playback edit menu after capture [see fig.3 and fig.
Figure 2 Down/Flip button (Flip hard key) Press hard key on top of device in live view Figure 3 Down Playback mode menu Figure 4 5
III.
1. Put Film onto the film cartridge 2. Insert the film cartridge into ROLLEI DF-S 290 HD 3. Connect power adapter to ROLLEI DF-S 290 HD 4.
5. Press OK button to capture the image 6. Follow the menu on display for scanning 7. After finished the capture, take out the SD card which stored capture images 8.
IV. Operation Guide Home: Main menu Capture Playback Film Type 1. Capture Setting USB mode ● Capture: capture mode (default) ● Playback: playback mode ● Film Type: define the film type which loaded in cartridge ● USB mode: MSDC (Mass Storage Device Class) mode ● Setting: TV out and format option Capture After welcome page, above menu will remains for 5 sec. User can press up/down button for desired menu. Or system will auto enter Capture mode if there is no action during this 5 second period. 1.
< Up > ● Press < Up > button to enter Mirror/Flip adjustment (see Chapter 1.2) < Down> ● Press < Down > button to enter Brightness/Color adjustment (see Chapter 1.3) 1.2 Capture: / - Flip / Mirror (Hard Key) Up/ Mirror button Go Back to 1.
● Press < Down > button to upside down image 1.3 Capture: / - Brightness/Color (Hard Key) Up/ Flip button Go Back to 1.1Capture button Down/ Flip button ● Press < Up > button to enter Brightness adjustment (See Chapter 1.4) ● Press < Down > button to enter Color adjustment (See Chapter 1.
1.4 Capture: / - Brightness (Hard Key) Up/ Mirror button Go Back to 1.1Capture button Down/ Flip button ● Press button to increase Brightness with ranges of -3 to 3 ● Press button to decrease Brightness with ranges of -3 to 3 1.5 Capture: / - Color Red (Hard Key) Up/ Mirror button Down/ Flip button 12 Go Back to 1.
● Press button to increase red color with ranges of -3 to 3 ● Press button to decrease red color with ranges of -3 to 3 1.6 Capture: / - Color Green (Hard Key) Up/ Mirror button Go Back to 1.
Press button to decrease green color with ranges of -3 to 3 ● 1.7 Capture: / - Color Blue (Hard Key) Up/ Mirror button Go Back to 1.
1.8 Capture mode Live view indicator (flashing at 0.5sec rate) Once enter capture mode, there will be a red indicator on left top corner to indicate it is in live view mode. When the film cartridge is inserted into the scanner slot, the image always shows the positive image according to previous defined Film Type (after power on. the Film Type is default to negative film). Reconfirm the film position through the display before press OK button. 1.
1.10 Live View -> Capture/Edit Menu Live View Capture/Edit Menu OK OK Once press OK button in live view, the edit menu will be appeared. When user press OK button again, the current image will be saved into SD card. The display will return to live view again. 1.11 Capture: Save Save Once user press OK button on top of ROLLEI DF-S 290 HD, preview (live view) image will be selected and shown on the TFT which will take between 3-4 second with 4 icons shown on the left side of the screen.
+90 degrees, they can press the OK button, the image will be rotate +90 degrees and cursor will remain at Save. Press OK button again will save the rotated image to SD card and screen will return to live view. For continuously rotate +90 degrees, move cursor to rotate again and press OK. 1.
1.16 Memory full OK Once the internal memory or SD card is full, user can see a SD card full once press OK button. User has to down load the images to PC or replace another SD card for continue capture. 1.17 SD card locked SD card locked indicator If the SD was locked, once press the OK button, a SD Card locked icon displays on screen. Please do slide the switch of SD card to unlock before insert into device. 1.
2. Playback Playback Press Down button to Playback mode when power on ROLLEI DF-S 290 HD or access the main menu by Home icon if during operation. Press OK button to confirm the selection. 2.1 Playback: Auto Slide Show Slide show mode Once user enter playback mode (default to slide show), 3.0 TFT will auto display all images stored in SD card with 2 seconds interval from previous captured image. User can also stop the slide show mode by press OK button. 2.
● ● ● ● Exit: returns to Slide show Delete: delete this picture stored in SD card Save: save the modified image onto SD card Home: returns to main menu 2.3 Playback: Slide mode -> Edit mode User can interrupt (stop) the slide show mode to stand alone playback mode (single picture playback) by press OK button. (Pause slide show) Then user is able to scroll each picture by up/down button.
If user wants to Rotate +90 degrees by OK button, the image will be rotate +90 degrees and cursor will remains at Save. Press OK button again to save modified result and next picture will be shown (N+1). For continuously Rotate +90 degrees, move cursor to Rotate again and press OK. (Same for Rotate -90, Mirror, and Flip function) 2.
2.9 Playback: No Picture OK If there’s no picture inside internal memory or SD card when enter playback mode, a No picture symbol will show on display. 3. Film Type Film Type Change film type definition by enter Film Type menu when power on ROLLEI DF-S 290 HD or access the main menu by Home icon if during operation. Press down button for Film Type and press OK to confirm. 3.
3.2 Film Type: Example Color Negative film B&W Negative film Loaded Into Cartridge Slide 4. USB Mode USB mode After finished capture, user can download the stored images from internal memory or SD card to PC by selecting USB mode. Press OK button when connect USB cable to PC, ROLLEI DF-S 290 HD becomes a mass storage device. User can review or edit images once PC detected the external storage device. Or just take out the SD card from device into PC to read the images directly.
4.1 USB Mode: Status Once user select USB mode, ROLLEI DF-S 290 HD becomes a mass storage device and then a status icon shows on display, then user can find an external USB disk device from my computer and review the images in internal memory or SD card with PC. 5. Setting Mode. Setting The setting mode covers TV out and format option. User can connect the device to TV and finish the operation with TV display. Moreover, the scanned images can be playback on TV display to share with family.
5.2 Setting: Interpolation Interpolation on Interpolation off User can have the option to use the interpolation method to increase the picture resolution to 3600dpi. Use Up and Down key to the interpolation selection and press OK button to interpolation menu. NOTE: the capture mode takes a few second longer in image processing while the interpolation function is turned on.
5.4 Setting: HDMI output Connect on end of the HDMI cable to the scanner's HDMI port and the other end of the HDMI cable to TV's HDMI port. The TV now becomes the display for preview and playback, in full HD 1080p resolution. Note: when both the HDMI cable and AV cable connect to TV, the HDMI output signal will override the AV output. 5.5 Setting: Format OK If the internal memory or SD card requires format by scanner, user can enter format mode by press OK button.
V. Specification Image Sensor: Lens: LCD: Internal memory: Focus Range: Exposure Control: Color Balance: Scan Quality: Data Conversion: Scan Method: Light Source: Interface: USB Configuration: Power: Dimensions: Weight: External memory: 9 mega CMOS sensor Precision Glass Element Fixed Focus 3.0’’ Color TFT LCD 24MB NAND Flash (for saving images) Fixed focus 6 levels of control 6 levels of control 2,400 dpi；3,600 dpi (interpolation) 10 bits per color channel Single pass Back light (3 white LEDs) USB 2.
