Specifications

SELF-TIMER

Activate the self-timer by pressing the shutter

release down fully.

• Once the self-timer is activated, the self-timer

lamp at the front of the camera will blink,

increasing its frequency as exposure draws

closer. Immediately before exposure the lamp

stays lit.

• At the same time, beeps will be heard that can

be disabled via the SETUP menu.

• If your main subject is off center, use focus lock

(see page 38).

• After the exposure, the camera resets to single-

frame shooting.

• Do not press the shutter release from in front of the camera! You would block the camera’s

view and make focusing impossible.

• To deactivate the self-timer, turn the control dial to

, PC or SETUP.