Specifications

26
LOADING THE BATTERIES
CHECKING BATTERY POWER
With batteries loaded, the camera automatically
checks their condition and displays the result on
the data monitor.
lit
- Full power
lit
- Less than full
power, but camera remains fully
operative
The display goes dead, followed by five-
second blinking of
, whereupon it goes
dead again.
– Battery power
insufficient for operation
of camera.
• Replace all batteries by fresh ones.
• Remove all batteries and use the optional AC
adapter (see page 27).
• If the data monitor remains blank, replace the
batteries or check whether they have been
loaded with correct polarity (+/-).