Rollei Action Camera 410 User Manual
Table of contents Contents Table of Contents..................................................................................................1 Safety Precautions................................................................................................2 What’s in the Box..................................................................................................3 Product Diagram...................................................................................................4 Remote Diagram.....
Safety Precautions Before using the Rollei Actioncam 410, please ensure you read and understand the safety precautions. z Do not attempt to open the case of the camera or modify it in any way. If the camera has been opened, the warranty will be void. Maintenance and repairs can only be performed by Rollei. z Keep the camera away from water and other liquids (unless used in the waterproof case). Do not handle the Rollei Actioncam 410 with wet hands (unless used in the waterproof case).
What’s in the box Please ensure the product package has the following contents: A Rollei Actioncam 410 H Flat mount B Waterproof case I 3M adhesive C Portable camera frame J Lock Bolt D Roll bar mount for bike K Helmet strap E Quick release mount L F Helmet mount M USB cable G Curved mount N Wrist Remote controller Knuckle 3
Product Diagram A WI‐FI Activation (Down select) F B LED power indicator G USB interface C LCD screen H Micro SD card port D SHOOT (menu select) I Mini HDMI interface E Microphone J Removable Li‐Battery Left Side POWER(and menu) Right Side 4
Remote Diagram Please note: with the remote controller you cannot turn the camera on. Please ensure the camera is switched on before using the remote. A LED Indicators B Shoot Photo C Record Video D Power Off E Micro USB Charge port on the back of remote Press and hold the “Power Off” button around 4sec. to turn the camera off. To use the remote, please code first before power on the camera. Coding procedures: 1.
Setup Your Rollei Actioncam 410 Turn the camera on‐ press and hold the POWER button for several seconds. When the camera is on, the Rollei logo will appear on the screen and the three red LED lights will glow red. The camera is now in video mode.
Video Mode Video mode screen Once the camera is turned on, it goes to the video capture mode by default. Press SHOOT button to start recording. When the recording starts, you will see the red lights start flashing. To end recording, press the SHOOT button again. To enter the Settings menu, press the POWER button (press and release immediately‐if it is held too long the camera will switch off). Note: The Setup menu is depending on the active mode.
Video Settings Video Settings Screen This allows user to adjust Video quality settings. Navigation: Use Wi‐Fi button to navigate, SHOOT button to Enter/Confirm selection, POWER button to go back.
z 5 Mins‐In this mode, camera will generate new file on every 5 mins White Balance Factory default is Auto. If you switch Auto OFF, remember to adjust when lighting conditions change. Following pre‐set modes are also available Daylight, Cloudy, Tungsten, Fluor Microphone SELECT Outdoor or Car to record in different scenes with better audio effect, SELECT OFF for video only.
General Settings General Settings Screen (Page 1) This allows user to adjust the general device settings. To enter General Settings, enter the Settings menu first by pressing POWER button, then press and hold the SHOOT button for 3secs Navigation: Use Wi‐Fi button to navigate, SHOOT button to Enter/Confirm selection, POWER button to go back. Auto LCD Off This will determine if the LCD will turn off after 1 min, 3 min or 5 min. Press any key to turn the screen on. Select OFF to keep the screen always ON.
Date & Time This allows user to adjust the date &time. Note: Use the Wi‐Fi button to change the date and time, use SHOOT button to confirm. The date is entered in Year/Month/Day format. Time is based on a 24hr clock. Language To select the device language. Light Frequency Selecting the correct light frequency will avoid the possibility for strobing.
Timelapse This feature allows you to set the intervals/frequency at which a frame is captured. You can set the time Frequency here. System z Factory Reset; to reset the camera to factory default. z System Info; to check the firmware version. z Card Info; to see the SD card information. Wi–Fi Password Set up your new Wi–Fi Password. Note : The default Wi–Fi Password is 1234567890. Use the Wi‐Fi button to navigate, use SHOOT button to confirm. Wi‐Fi SSID Set up your new Wi‐Fi name.
General Setting Screen (Page 3) Format This is to format the card. Choosing to format the card will permanently erase all data on the card.
Picture Settings Picture Setting Screen 1 To enter the SETUP menu for Picture Mode, press POWER button (press and release immediately‐if it is held too long the camera will switch off). Resolution To select the image resolution. Quality To set the image quality. Metering Metering mode refers to the way in which a camera determines the exposure.
White Balance Factory default is Auto. If you switch Auto OFF, remember to adjust when lighting conditions change. ISO This is the measurement of how sensitive a digital camera’s sensor is to light. Picture Setting Screen 2 Exposure This allows user to set the light exposure value. Self‐timer This allows user to set the timer for auto image capture.
z Date: to display date on captures z Date & Time: to display date& time on captures Using Your Rollei Actioncam 410 Preparation Charging the battery Before using the Rollei Actioncam 410 for the first time you should fully charge the battery. Procedure: 1. Connect Rollei Actioncam 410 to a computer (or other USB power source) using the USB cable (provided). 2. A: If the Camera is on when charging, 3 red lights will glow red until the battery is fully charged.
video files. Lower class cards may cause the video to be blurry or jerky. z There is only one correct direction to insert the Micro SD card into the slot. Do not force the card into the card slot, as it may damage both the camera and the card. z It is recommended to format new cards of cards that have been previously used in other cameras. To format the Micro SD card: Note: Formatting the card will permanently delete the contents.
Playback Mode Navigation: Use Wi‐Fi button to navigate, SHOOT button to Enter/Confirm selection, POWER button to go back. This will allow you to watch the captured videos & images. Enter the Picture mode first, then press and hold the SHOOT button for 3secs. To watch a captured video, go to VIDEO and select the file. To view a captured image, go to IMAGE. To view a loop recording, go to LOOP To delete the image, select the file and Press POWER button. You will see delete option there.
z Connect Mini HDMI end to the port on camera and HDMI end to HDMI port on the TV z Select the right source on the TV z Turn the camera on Wi‐Fi Setup The Rollei Actioncam 410 allows full camera control, live previewing and playback of photos/videos on most Smartphones and Tablets. 1. Download the App “Rollei 400/410” from “Google Play” or from the Apple “App Store”. Rollei 400/410 2. Activate Wi‐Fi on your Rollei Actioncam 410 by pressing Wi‐Fi button. 3.
1234567890 Note: You can change the Wi‐Fi password in the menu setting. 6.Open the app “Rollei 400/410” Important: Before connecting camera via Wi‐Fi, you need to download the “Rollei 400/410” App on your smart phone or tablet. App Interface Diagram Battery Icon Settings Video Resolution Playback Mode Record Switch Photo/Mode Note: To watch the recorded videos on your phone, you need to download them first.
The camera LCD will display MSDC icon and your computer will see your camera as an external storage device. Alternatively you can remove the Micro SD card and use a card reader (not included) to achieve the same result. 1.Select the file(s) you want to transfer to your computer by highlighting them. 2.
FAQ Q. Why are the red LEDs flickering？ A. The battery is running low. You must recharge the camera. Q. My Rollei Actioncam 410 will NOT turn on. Why? A. The battery is flat. You need to recharge it (full recharge from flat will take about 5 hours). Q. My Rollei Actioncam 410 turns off automatically. Why? A: The battery is running flat or you set auto power off function. Q. Videos and pictures are blurred. Why? A: The lens may be dirty. Clean the lens first. Q.
Specifications Underwater Down to 30m (with waterproof casing) Sensor 4.0 megapixels CMOS sensor Video: 1080p@60fps, 1080p@30fps, 720p@120fps, 720p@60fps Resolution Still photo: 4 megapixels (12 megapixels interpolated) Storage type Micro SD card up to 32GB (not included) Lens 150°‐view fixed lens Lens aperture F/2.8 Lens focus 0.
Declaration The Manufacturer hereby declares that the CE marking was applied to the Rollei Actioncam 410 in accordance with the basic requirements and other relevant provisions of the following CE Directives: 2011/65/EC RoHs Directive 2004/108/EC Low Voltage Directive 1999/5/EG R&TTE Directive 2006/95/EEC LVD Directive 2009/125/EG EuP Directive 2002/96/EG WEEE Directive The EC Declaration of Conformity can be requested from the address specified on the Warranty card.
License Statement The software used in this product is licensed subject to a license pursuant to the GNU – General Public License conditions. We expressly draw attention to the fact that under the GNU – General Public License conditions no liability is accepted. The starting point for the software is the software published online at http://sg‐gpl.net/ The software listed there is licensed pursuant to the GNU – General Public License conditions.
of the source text of the implemented software for a period of at least three years from date of purchase from the trade source of supply where the trade source of supply has sourced the product from us directly or via strictly trade‐only dealers.
