User Guide

21
Setting Up
– Fasten the monopod [3] in the matching
thread on the base plate [6].
– Mount the ring light [1] on the 1/4“
screw thread [2] of the monopod [3].
– Then adjust the Rollei LUMIS Tabletop
Ring Light Bi-Color to the desired height
by loosening the adjustment thread [4]
and pulling the segments of the mono-
pod [3] apart. Tighten the adjustment
thread [4] again.
– Now attach the smartphone holder [6]
to the upper segment of the monopod
[3] by opening the clamp, placing the
ring around the monopod and closing
the clamp again.
– Connect the Rollei LUMIS Tabletop Ring
Light Bi-Color via the USB-A connection
to your computer or to a power supply
unit with USB-A connection (not inclu-
ded in the scope of delivery; required
output of the power supply unit:
5 V
2 A).
600 mm
340 mm