Dear customer, Congratulations on purchasing a high-quality Rollei product. You have acquired a modern Negative and Slide Scanner with excellent technical features and respective accessories, which is particularly easy to operate. Please study this information in detail, observing safety instructions, in particular. The scanner comes with a 2-year warranty. You will need the enclosed warranty card and your sales receipt in the event of the Negative and Slide Scanner developing a fault.
Contents 1 1 2 3 4 5 6 7 7 7 10 11 12 12 13 14 15 16 16 17 2 Introduction Contents of box Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. Safety Instructions Description of parts Negative holder loading method Loading Slide Operation Guided 5.1 Introduction of Menu 5.2 Capture Picture 5.3 Operation Guide 5.4 How to playback captured picture 5.5 Setting Language 5.6 Resolution Choosing 5.7 Formatting 5.
1. Safety Instructions • • • • • • • • • Do not disassemble this unit. Do not touch inner part of the scanner after dropping or other damage suffering. Do stop using it if there is any problem with the scanner, such as smoke or smell while using. Do not clean the scanner with alcohol, gasoline, diluent and other organic solvent. Do not use it in many dusts with the damp environment. Do not overload the USB connections on your computer to avoid poor working of the scanner for overloading.
Negative Adapter 2. Description of parts Negative Film Holder THIS SIDE UP Super8 Insert Super 8 Film scanner THIS SIDE UP 110 Insert 110 Film Holder TV cable USB cable Adapter • 4 Positive Slide Holder User Manual Brush Please use a clean product, if you use the cleaning brush to clean the backlight panel.
3. Negative holder loading method Hold up the negative toward the light. Face the right side of the negative to yourself. Take out negative holder out. Let the side with “open” logo face yourself, and let the side with “ ◄ ”logo face down. Open the negative holder, then place negative into recessed area in the holder.Close the negative holder and press the edges so that it locks in place Insert the negative holder into the slot on the right side of the film scanner .
4. Loading Slides Slide: Its light, shade and color of the slide are exactly as same as original image. Place the slide into the holder with the glossy side facing up and the image should be upright. Insert slides To select the desired thickness of the slide cartridge, push the slider in an up down motion along the groove. Thickness selection indicators are located at the top of the holder. Hold it in the position as shown in the film scanner.
5. Operation Guided 5.1 Introduction of Menu ① ② ③ ④ ⑤ ① Language mode ② USB mode ③ Capture mode ⑥ ⑦ ④ Format ⑤ Playback mode ⑥ Film Type ⑦Resolution 5.2 Capture Picture Before scanning please make sure the inner backlight panel is clean. Note: You can use the provided brush to clean the screen.
In main Menu mode press OK/ENTER enter capture mode, then press Convert/Mode then press OK/Enter the picture would be captured. OK/Enter Convert/Mode OK/Enter Before pressing to capture picture, you can press left button to mirror and press right button to flip the current picture. And you can press OK button to set Exposure.
Then press Convert/Mode button again back to main menu.
5.
5.4 How to playback captured picture In main menu, press ◄ or ►, until playback mode, press OK/ENTER to the picture auto-playback mode press again to stop auto playback and you can view captured pictures manually, you can press ◄ or ► to view. ENTER press OK/ENTER again enter picture editing mode, you can rotate, delete, exit, save, and "home" back to main menu.
② ③ ④ ⑤ ⑥ The current picture rotate 90 digree anticlockwisely Deleting the current picture from memory card Exit the submenu edit mode,back Saving the current edited picture Exit the submenu edit mode,back to scan 5.
5.7 Formatting In the main menu, press ◄ or ► to Format mode, press OK/ENTER button to enter.
5.8 Connect to computer Under main menu mode, press ◄ or ► until USB MSDC, press OK/ENTER after successfull connectting to computer, you can view and edit captured pictures.
6. Product Specification Function : Film scanner/USB MSDC Interface: USB 2.0 Image Sensor : Display: Exposure Control : White Balance : Resolution : 14.0 Mega pixels(4416*3312) 1/2.3” CMOS sensor Color 2.4" TFT LCD Automatic / Manual (-2.0 EV~ +2.0EV) Automatic 14.0 Mega pixels/ 22Mega pixels(interpolation) Film type : 135 Film(36*24mm) / 126KPK Film(27*27mm) 110 Film(17*13mm)/Super8 Film(4.01*5.
7. Declaration Please note products spec is subject to improvement .Any changes of product will not make additional specify. Please Note: We reserve the right to change the appearance of the product, specifications, performance, parameters and design without prior notice. The pictures of color box and manual are for reference only. Brochure with pictures for reference,actual product and picture may be slightly different,specific please in kind prevail! 8.
9. Conformity The Manufacturer hereby declares that the CE marking was applied to the Rollei DF-S310SE in accordance with the basic requirements and other relevant provisions of the following CE Directives: 2011/65/EC RoHs Directive 2014/30/EU EMC Directive 2006/95/EEC LVD Directive 2009/125/EG EuP Directive 2002/96/EG WEEE Directive The EC Declaration of Conformity can be requested from the address specified on the Warranty card.
