Technical data

8
INSERTING THE BATTERY
Inserting the battery
The camera takes a 3 V lithium battery e.g. CR 2/
DL CR 2. A NiCad battery should not be used.
›
Unlock the battery compartment cover (15)
and open it.
›
Insert the battery with the poles the right way
round.
›
Close the cover and secure it in place.
›
Always switch off the camera before chang-
ing the battery.
Make sure the old battery is disposed of properly!
Note:
If you are not using the camera for several
weeks, take the battery out.
Important
›
The date shown in the display disappears 5
seconds after the battery has bee removed.
You will therefore have to reset the date
when you put in a new battery.
›
Should the battery run out while the film is
rewinding, insert a new battery and continue
the rewinding process by pressing on the
rewind button (22). When the rewinding pro-
cedure has finished, the frame counter will
show “E”.