Owners manual

[phone] • www.rollnlock.com
page 4
S TEP 2: I NSTALL THE H OUSING
A. If not
already
done,
remove
the
bulkhead
deck rail
(Photo
4).
B. Place the
Housing
Assembly onto the bedrails (Photo 5). This is
best accomplished with two people. Center it
between the bedrails and leave about ½" of
space between the bulkhead and the back of
the Housing.
Do not fasten the Housing in
place.
C. Lift the Lid on the Housing and lean it against
the cab (Photo 6). Place a rag between the Lid
and cab to prevent scratches.
D. Making sure to leave the Pull-Strap
connected to the threaded shipping
Stud,
rotate the Lock Lever to the 10 o’clock
position (Photo 7).
Photo 5
Photo 6
Photo 7
Photo 4
S TEP 3: I NSTALL THE T RACKS ON D ECK R AIL
E QUIPPED B EDS
A. Remove the End Caps from the deck rails
(Photo 8).
B. Insert threaded rectangular blocks (2 each
side Crew Max bed; 3 each side short/long
bed).
Photo 8