Owners manual

[phone] • www.rollnlock.com
page 16
S TEP 8: O PENING AND C LOSING / A DJUSTING
THE H INGED L ID
To Open:
A.
Grasp the Latch Pin Knobs, pull out and turn
knobs 90° to hold Pin in the unlock position.
Grasp the Lid and lift. Rest the Lid against
the back of the cab to hold open for service or
cleaning (Diagram 56).
To Close:
A. Lower the Lid and return the Latch Pins to
locked position by turning the knobs 1/4 turn.
If Lid is loose:
A. Raise Lid and loosen the nylock nut on each
Lid Latch Bracket, move the top half of the
Bracket one notch toward the tailgate. Tighten
both nuts and close Lid (Diagram 57).
If Lid is tight:
A. Raise Lid and loosen the nylock nut on each Lid Latch Bracket, move the top
half of the Bracket one notch toward the Housing. Tighten both nuts and close
Lid (Diagram 57). Repeat if futher adjustments are needed.
Lid
Knob
Back
of
Cab
Diagram 56
Nylock Nut
Latch
Track
Diagram 57