Owners manual

Page 4

Step 2: Install the Housing (Cont.)

Step 3: Install the Tracks

Lift the Lid on the Housing and lean it

against the cab (Diagram 5). Place

a rag between the Lid and cab to

prevent scratches.

Making sure to

leave the Pull

Strap connected

to the Shipping

Stud, rotate the

Lock Lever to the

10 o’clock

position

(Diagram 6).

Unwrap the Tracks and locate the supplied

Bed Clamps that are taped together along

with the bolts and washers. Unwrap the

Clamps and set them in the bed of the

truck. Carefully place the Tracks on the

bedrails (Diagram 7) and key them onto

the Housing Stems (Diagram 8), being

sure that the Handle is properly engaged

into the Tracks.

Diagram 7

Diagram 6

Diagram 5

Diagram 8

Attach the back

Clamps very

loosely to the

Tracks to be sure

that the Tracks

do not fall off

of the bed rail

while proceeding

(Diagram 9).

Use the #10-24 x 3/8” truss head screws and Cargo Nuts supplied to secure the Tracks

to the Housing Stems (Diagram 10). Tighten these connections securely.

Attach the remaining Clamps very loosely. Do not tighten yet.

Diagram 9 Diagram 10