Owners manual

Page 4
Step 3:Install the Housing
Step 4:Install the Tracks
Place the Housing Assembly on
the bedrails (Diagram 4). This is
best accomplished with two people.
Center the Housing between the
bedrails with the back of the Housing
up against the bulkhead. Do not
fasten the Housing in place.
Making sure to
leave the Pull
Strap connected
to the Shipping
Stud, rotate the
Lock Lever to the
10 o’clock
position
(Diagram 6).
A.
A.
B.
B.
Lift the Lid on the Housing and lean it
against the cab (Diagram 5). Place
a rag between the Lid and cab to
prevent scratches.
Unwrap the Tracks and locate the supplied
Bed Clamps that are taped together along
with the bolts and washers. Unwrap the
Clamps and set them in the bed of the
truck. Carefully place the Tracks on the
bedrails (Diagram 7) and key them onto
the Housing Stems (Diagram 8), being
sure that the Handle is properly engaged
into the Tracks.
Diagram 4
Diagram 7Diagram 6
Diagram 5
Diagram 8