Installation & Assembly

32 33rd Street, Unit 10, Brooklyn, NY 11232

T +1 718 387 6132 F +1 718 387 6104

www.rollandhill.com

CONTENTS

SAFETY INFORMATION

Only suitable for direct mounting on non-combustible surfaces.

Under no circumstances can Counterweight Fixtures be mounted on normally flammable surfaces.

Suitable for dry, indoor use only.

Maximum ambient temperatures: 25˚ C

Counterweight Floor Lamp Stone Counterweight

Thumb Screws (2)

Glass Shade

PAGE 1
32 33rd Street, Unit 10, Brooklyn, NY 11232 T +1 718 387 6132 F +1 718 387 6104 www.rollandhill.com CONTENTS Counterweight Floor Lamp Stone Counterweight Glass Shade Thumb Screws (2) SAFETY INFORMATION Only suitable for direct mounting on non-combustible surfaces. Under no circumstances can Counterweight Fixtures be mounted on normally flammable surfaces. Suitable for dry, indoor use only.
PAGE 2
32 33rd Street, Unit 10, Brooklyn, NY 11232 T +1 718 387 6132 F +1 718 387 6104 www.rollandhill.com FLOOR LAMP ASSEMBLY Note: Please contact a licensed electrician. Note: Do not use bulbs that exceed 60 watts. Align the stone counterweight over the wood peg on the base. Cafefully place the stone onto the base. Once the light is balanced, you can attach the glass.
PAGE 3
2 33rd Street, Unit 10, Brooklyn, NY 11232 T +1 718 387 6132 F +1 718 387 6104 www.rollandhill.com GLASS ASSEMBLY Note: Please contact a licensed electrician. Note: Do not use bulbs that exceed 60 watts. 1. Position the holes of the glass over the holes of the standoffs on the fixture. 2. Screw in the 8-32 thumb screws until the glass is gently pressed against the wood. Do not over tighten, or the glass may break.