Product Manual

Positive Lock Pins:
Positive Lock Pins are available
and are used to easily and quickly
separate your ramp into sections
for easier handling and storage,
and may be obtained from your
dealer.
ese pins may be inserted at any
juncture where the links are joined
together.
Simply remove the bolts using the
tools provided with the ramp. To
insert the pins, simply line up the
holes where the bolts were removed,
and insert the pins. Ensure the pin
is securely locked into place to
ensure safety before using ramp.
Do not replace yellow caution
covers.
Semi-permanent Installation:
ese brackets allow you to secure
your Roll-A-Ramp, yet still leaving
it portable - simply li the ramp to
remove.
e brackets illustrated above can
be installed on the vertical section
of the last step prior to the landing
surface. Accommodates all ramp
sizes (2 pair needed for 12” ramp).
is creates a ush entrance/exit
from the ramp.
MOUNT FOR 12” (30.48cm) RAMPS
MOUNT
BRACKET
MOUNT FOR 26”, 30” OR 36” RAMP
(66.04cm, 76.20cm or 91.44cm)
OR