Product Manual

the arching links allow the user
to more easily enter a van, porch,
or doorway because of the more
favorable approach angle. is also
ensures clearance for lower devices.
Again, by placing the ramp with
the “Upper End” at the elevated
position, operation will be more
favorable.
Changing Ramp Length
Your Roll-A-Ramp is designed
so you may change the length by
simply adding additional 1 foot links
or removing links. is is done by
removing the bolt and nut from the
link on the lower end and inserting
additional 1 foot links as needed.
Please call your dealer, or contact
Roll-A-Ramp toll free at 1-866-883-
4722.
Versatility
Your lightweight Roll-A-Ramp rolls
up and comes with its own handy
strap/handle for convenient
carrying and storage.
You can congure your Roll-A-
Ramp for many dierent uses.
Besides using it as a completely
portable ramp system, you can
modify your Roll-A-Ramp so the
ramp is rigid or folds in the center
for easy mounting into a vehicle.
(Additional mount bracket required.
See Accessories.)
To make your ramp fold in the
middle you will want to have two
pivot points per single ramp as
illustrated.
To convert your Roll-A-Ramp so
that it folds in the middle:
• Lay the Roll-A-Ramp bottom
side up.
• Add washers under nuts where
the ramp will be rigid.
• Fully tighten all bolts using the
1/2” (13mm) Wrench and
Allen Wrench. Do not tighten the
bolts at the pivot point. You may
nd a socket wrench (1/2”) works
better.