Where Strength and Flexibility Meet Owner’s Manual Please read entire manual BEFORE using your Roll-A-Ramp Roll-A-Ramp • DT&J, Inc. 159 8th Ave NW, West Fargo, ND 58078 www.rollaramp.com • sales@rollaramp.
Tool List: Allen Wrench (Supplied with your Roll-A-Ramp) 1/2” (13mm) Wrench (Supplied with your Roll-A-Ramp) Assembly: Your Roll-A-Ramp has been shipped assembled to your specifications. Ramps over 10 ft. total length, please see addendum enclosed with this manual for final assembly instructions. General Information Roll-A-Ramp is lightweight, durable, and versatile.
the arching links allow the user to more easily enter a van, porch, or doorway because of the more favorable approach angle. This also ensures clearance for lower devices. Again, by placing the ramp with the “Upper End” at the elevated position, operation will be more favorable. Changing Ramp Length Your Roll-A-Ramp is designed so you may change the length by simply adding additional 1 foot links or removing links.
Positive Lock Pins: Semi-permanent Installation: Positive Lock Pins are available and are used to easily and quickly separate your ramp into sections for easier handling and storage, and may be obtained from your dealer. These brackets allow you to secure your Roll-A-Ramp, yet still leaving it portable - simply lift the ramp to remove. OR The brackets illustrated above can be installed on the vertical section of the last step prior to the landing surface.
Support Stand Installation Instructions: For ramps over 11 ft, support stands are recommended. 1. Set up ramp to desired location. 2. Place support stands under ramp at midway point (or every 6-8 ft) and adjust height so that support stands are same height as ramp. Spacers Spacers for 12”(30.48cm) models: Spacers hold the ramps parallel to each other to assure that your 12” (30.48cm) Roll-A-Ramps stay at the correct width. We can provide you with spacers of various sizes to accommodate any axle width.
Distributed Weight Maximum Loads Your Roll-A-Ramp has the maximum distributed weight load chart listed on each ramp. If you add links to your ramp, the maximum distributed weight load capacity may decrease as indicated in Chart 1. Chart 1 Roll-A-Ramp Load Capacities Note: Adding links decreases load capacity. ® TÜVRheinland geprüfte Sicherheit Germany, Austria, The Netherlands, Belgium, Luxembourg Ramp Width (inches/cm) Overall Length (feet/cm) Allowable Capacity (pounds/kg) 12/30.48 12/30.48 12/30.
Warranty Registration Card Thank you for purchasing Roll-A-Ramp. We know that it will give you years of flexible, easier access to vehicles, homes, and other buildings. Please fill out and return this card so we may keep you informed about new Roll-A-Ramp products, accessories, and company news. We will NOT share your information with any third parties.
Cut Here _______________________ _______________________ From: ______________________________ Roll-A-Ramp/DT&J, Inc 159 8th Avenue NW West Fargo, ND 58078 FIRST CLASS POSTAGE HERE
