User guide

030-300564 Rev A 92 August 2009
User Guide ProLine G90
(
Models 6100
,
6110
)
13.4.5.1 QoS Filters—Edit Filter Rules
The following screen will appear if you click the edit filter rules button from the QoS screen (Advanced > WAN >
QoS > QoS Filters). This screen allows you to edit any Internet Protocol QoS filters that have been created.
Rule Displays the order in which rules are applied: Rule 0 is first.
Packet Interface Displays direction of traffic where the rule will be applied.
Header Displays the packet header attribute to be evaluated.
Value Displays the value of the packet header attribute to be evaluated.
Mask Displays the type of mask selected.
Comparator Displays the type of comparison used.
delete Click this button to delete a QoS Filter.
up Click this button move a QoS Filter “Up” in priority.
down Click this button to move a QoS Filter “Down” in priority.
new filter Click this button to create a new QoS filter using the QoS Filters screen. Refer to
section 13.4.5.2, “QoS Filters—New Filter.”
cancel Click this button to return the screen to its previous settings.