User guide

030-300564 Rev A 88 August 2009
User Guide ProLine G90
(
Models 6100
,
6110
)
LCP Echo Disable Click this check box to enable or disable LCP Echo Disable. If checked, this option
will disable the modem LCP Echo transmissions. By default, LCP Echo Disable is
disabled (checked).
LCP Echo Failures Displays the number of continuous LCP echo non-responses received before the
PPP session is terminated. This number must be between 1 and 30 inclusive.
LCP Echo Duration Displays the interval between LCP Echo transmissions with responses. This number
must be between 5 and 300 seconds inclusive and greater or equal to LCP Echo
Retry Duration.
LCP Echo Retry Duration Displays the interval between LCP Echo after no response. This number must be
between 5 and 300 seconds inclusive.
Bridge Settings
Mode Click this drop-down menu to select the Bride Setting for the VC: Bridge or Routed
Bridge.
RoutedBridge Settings
Mode Click this drop-down menu to select the Bride Setting for the VC: Bridge or Routed
Bridge.
DHCP Client Click the option to enable or disable the DHCP Client feature. Enabling this feature
will obtain the IP address automatically. Disabling this feature will use the static IP
address that you type in the provided field
IP Address Displays the IP network address that your modem is on.
Subnet Mask Displays the subnet mask, which determines if an IP address belongs to your local
network.
Gateway Displays the IP address of the network gateway, which is provided by your ISP.
DNS Primary Displays DNS Primary address, which is provided by your ISP.
DNS Secondary Displays DNS Secondary address, which is provided by your ISP.
Proxy ARP Click the option to enable or disable the Proxy ARP feature.