User guide

030-300564 Rev A 8 August 2009
User Guide ProLine G90
(
Models 6100
,
6110
)
4.2 Cable Connectors and Locations
• DSL connector (RJ-11)
• Ethernet (RJ-45) connector DATA port
• Reset push button
• Power connector (12 VDC) barrel
Model 6100 and Model 6110 - Rear View
Reset
Power
Connecto
r
Ethernet
Connecto
DSL Line
Connecto
r
Button
r
4.3 Connector Descriptions
The following chart displays the modem’s connector types.
N
AME TYPE FUNCTION
DSL Modular 6-pin (RJ-11) DSL jack
Connects the modem to a telephone jack that has active DSL
service or to the DSL port of a POTS splitter.
DATA Modular 8-pin (RJ-45) Ethernet jack
Connects the modem to a PC or Hub via 10/100 BaseT
Ethernet.
12VDC Barrel connector Connects the 12 VDC power connector to an AC wall jack.
4.4 Installation Requirements
This section explains the hardware installation procedures for installing your modem.
To install the modem, you will need the following:
• Active DSL line
• Network Interface Card (NIC) installed in your PC, or
• Available USB port installed in your PC
IMPORTANT: Please wait until you have received notification from your Internet service provider (ISP) that your
DSL line has been activated before installing your modem.