User guide

030-300564 Rev A 79 August 2009
User Guide ProLine G90
(
Models 6100
,
6110
)
Domain Name Type your Domain Name (name of your network) in the provided field. This name
uses the Internet standard for delineating domain names. To add a Domain Name,
type in your new domain name and click Set.
Static Host Assignment
Host Name Type a Host Name for your modem and IP Address in the fields provided, and
click the set button. To add a new Host name, in the field under Static Host
Assignment, type in the host name and IP address and click set.
If you click add, the screen will show that the Host Name and IP Address have
been added to the DNS server. If you want to delete a static host assignment, click
the delete button adjacent to the Host Name and IP Address fields that you want to
delete.
IP Address Displays the IP address that is assigned to the Host Name.
Discovered Local Devices Displays a list of local devices on the LAN that were assigned a DHCP Address.
The DNS name and IP address entry of each discovered device is displayed. If “No
Discovered Devices” is displayed, manually refresh the screen.
NOTE: Names may not contain spaces. Only letters, digits and the special characters dash (-), underscore (_) and
dot (.) may be used. These special characters may not appear at the beginning or at the end of a name. The maximum
length of a name can be is 63 characters.
To add a new DNS entry, please follow these steps:
1. Type the new Domain Name in the provided field, and then click Set to save the setting.
2. Type a Host Name and IP Address in the fields provided, and then click Add.
NOTE: Adding or deleting a static host is immediate, and does not require you to save changes.
Congratulations! You have successfully added a new DNS entry.