User guide

030-300564 Rev A 57 August 2009
User Guide ProLine G90
(
Models 6100
,
6110
)
12.4 Security Log
The following screen will appear if you select Security > Security Log from the main menu. This screen is an
advanced diagnostics screen and will alert you of noteworthy information sent to your modem from the Internet. It
may also contain entries that indicate Local Administrative Access and/or Remote Access logins or failures. Up to
1000 entries can be made, but a maximum of 50 entries are displayed at a time. Once 1000 entries have been logged,
the oldest entry is removed to make space for new entries as they occur.
Clear log Click this button to remove all entries from the log.
printable/savable format Click this button to open a new window that contains a list of all the logged packets
that can be saved to file or sent to a local printer.
Settings Click this button to select the information that you want logged via the Firewall Log
Settings window. Click OK on the pop-screen that follows. Refer to section 12.4.1,
“Firewall Log Settings.”
Packet Displays the packet number.
Time Displays the time that the packet was sent.
Direction/Source Displays the direction of transmission.
Rule/Reason Displays the internal rule that caused the logged event. The internal rule is set up
under Firewall rules.
Details Displays a description of the logged event.
Page Clicking a number link at the bottom of the page navigates you to the corresponding
range of entries. The most recent entries are always on the highest numbered page.