User guide

030-300564 Rev A 28 August 2009
User Guide ProLine G90
(
Models 6100
,
6110
)
NOTE: When you are ready to exit the modem’s interface, click on the X (close) in the upper-right corner of the
browser window. This will not affect your PPP Status; i.e., your PPP session will not be disconnected. You must
click the disconnect button to disconnect your PPP session. To restore this interface, open your Internet browser
window, type http://192.168.1.1/ in the browser’s address bar, and then press Enter on your keyboard. Type your
User name and Password in the pop-up screen as needed.
7.6 Changing the Administration Password
It is recommended that you change the administration password of your modem after completing initial installation
and setup. You can accomplish this through the Change Password screen (Security > Change Password). This
screen allows you to change the default administration name and password to values of your choice.
IMPORTANT:
1. The Security > Change Password screen allows you to use admin as your administrator name (your
administrator name can match your user name). However, you may not use password as your administrator
password. The values in these fields are case sensitive. Once you decide on an administrator name and password,
please record them for future reference.
2. This feature changes the Administrator’s password, not the PPP password.
Type your Administration Name and your Administration Password in the fields provided, and then click change
and OK. The password fields will be masked for security purposes.
Type a new password.
(Do not type the word
password here.)
Type admin or
the name of
your choice.
If you clicked OK after clicking change, the following screen will appear. Type in your new User name and
Password in the fields provided, and then click OK.