User guide

030-300564 Rev A 21 August 2009
User Guide ProLine G90
(
Models 6100
,
6110
)
4. Click next. The VPI/VCI window will appear, requesting information that will allow the modem to establish a
communications channel to the ISP.
5. Type in the following information in the fields provided:
• VPI (0-255): This is Virtual Path Indicator. This value is supplied by your ISP.
• VCI (32-65535): This is the Virtual Channel Indicator. This value is supplied by your ISP.
6. Click next. The PROTOCOL window appears, requesting a networking protocol to use when communicating
with the ISP.
7. Click the drop-down menu to select a protocol: PPPoA, PPoE, or Bridge. This information is provided by your
ISP.