User guide

030-300564 Rev A 17 August 2009
User Guide ProLine G90
(
Models 6100
,
6110
)
6.3 Installing the USB Driver for Windows Vista™
To install the USB driver for Windows Vista™, please follow these steps:
IMPORTANT: Confirm that the CD-ROM provided with the modem kit is inserted into the PC’s CD-ROM drive
before beginning this installation.
1. Windows Vista™: After you connect the modem to your PC, the following Found New Hardware screen will
appear (Figure 10). Click Next.
Figure 10. Windows Vista
2. Windows Vista™: The window below confirms that the PC has finished loading the drivers (Figure 11). Click
Close.
Figure 11. Windows Vista
Congratulations! You have completed the software installation for the USB drivers. Now return to section 5.1.2,
“Connecting USB Devices to Your Modem,” to complete the hardware installation instructions.